diff -urN oldtree/Makefile newtree/Makefile --- oldtree/Makefile 2006-01-28 19:08:42.000000000 +0000 +++ newtree/Makefile 2006-01-29 11:07:40.213510664 +0000 @@ -360,7 +360,7 @@ export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \ ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ - HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS + HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS NAME export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE diff -urN oldtree/Makefile.orig newtree/Makefile.orig --- oldtree/Makefile.orig 1970-01-01 00:00:00.000000000 +0000 +++ newtree/Makefile.orig 2006-01-28 19:08:42.000000000 +0000 @@ -0,0 +1,1327 @@ +VERSION = 2 +PATCHLEVEL = 6 +SUBLEVEL = 15 +EXTRAVERSION = +NAME=Sliding Snow Leopard + +# *DOCUMENTATION* +# To see a list of typical targets execute "make help" +# More info can be located in ./README +# Comments in this file are targeted only to the developer, do not +# expect to learn how to build the kernel reading this file. + +# Do not print "Entering directory ..." +MAKEFLAGS += --no-print-directory + +# We are using a recursive build, so we need to do a little thinking +# to get the ordering right. +# +# Most importantly: sub-Makefiles should only ever modify files in +# their own directory. If in some directory we have a dependency on +# a file in another dir (which doesn't happen often, but it's often +# unavoidable when linking the built-in.o targets which finally +# turn into vmlinux), we will call a sub make in that other dir, and +# after that we are sure that everything which is in that other dir +# is now up to date. +# +# The only cases where we need to modify files which have global +# effects are thus separated out and done before the recursive +# descending is started. They are now explicitly listed as the +# prepare rule. + +# To put more focus on warnings, be less verbose as default +# Use 'make V=1' to see the full commands + +ifdef V + ifeq ("$(origin V)", "command line") + KBUILD_VERBOSE = $(V) + endif +endif +ifndef KBUILD_VERBOSE + KBUILD_VERBOSE = 0 +endif + +# Call sparse as part of compilation of C files +# Use 'make C=1' to enable sparse checking + +ifdef C + ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) + endif +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif +ifdef M + ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) + endif +endif + + +# kbuild supports saving output files in a separate directory. +# To locate output files in a separate directory two syntaxes are supported. +# In both cases the working directory must be the root of the kernel src. +# 1) O= +# Use "make O=dir/to/store/output/files/" +# +# 2) Set KBUILD_OUTPUT +# Set the environment variable KBUILD_OUTPUT to point to the directory +# where the output files shall be placed. +# export KBUILD_OUTPUT=dir/to/store/output/files/ +# make +# +# The O= assignment takes precedence over the KBUILD_OUTPUT environment +# variable. + + +# KBUILD_SRC is set on invocation of make in OBJ directory +# KBUILD_SRC is not intended to be used by the regular user (for now) +ifeq ($(KBUILD_SRC),) + +# OK, Make called in directory where kernel src resides +# Do we want to locate output files in a separate directory? +ifdef O + ifeq ("$(origin O)", "command line") + KBUILD_OUTPUT := $(O) + endif +endif + +# That's our default target when none is given on the command line +.PHONY: _all +_all: + +ifneq ($(KBUILD_OUTPUT),) +# Invoke a second make in the output directory, passing relevant variables +# check that the output directory actually exists +saved-output := $(KBUILD_OUTPUT) +KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) +$(if $(KBUILD_OUTPUT),, \ + $(error output directory "$(saved-output)" does not exist)) + +.PHONY: $(MAKECMDGOALS) + +$(filter-out _all,$(MAKECMDGOALS)) _all: + $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ + KBUILD_SRC=$(CURDIR) \ + KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@ + +# Leave processing to above invocation of make +skip-makefile := 1 +endif # ifneq ($(KBUILD_OUTPUT),) +endif # ifeq ($(KBUILD_SRC),) + +# We process the rest of the Makefile if this is the final invocation of make +ifeq ($(skip-makefile),) + +# If building an external module we do not care about the all: rule +# but instead _all depend on modules +.PHONY: all +ifeq ($(KBUILD_EXTMOD),) +_all: all +else +_all: modules +endif + +srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) +TOPDIR := $(srctree) +# FIXME - TOPDIR is obsolete, use srctree/objtree +objtree := $(CURDIR) +src := $(srctree) +obj := $(objtree) + +VPATH := $(srctree) + +export srctree objtree VPATH TOPDIR + +nullstring := +space := $(nullstring) # end of line + +# Take the contents of any files called localversion* and the config +# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be +# careful not to include files twice if building in the source +# directory. LOCALVERSION from the command line override all of this + +localver := $(objtree)/localversion* $(srctree)/localversion* +localver := $(sort $(wildcard $(localver))) +# skip backup files (containing '~') +localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f))) + +LOCALVERSION = $(subst $(space),, \ + $(shell cat /dev/null $(localver)) \ + $(patsubst "%",%,$(CONFIG_LOCALVERSION))) + +KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION) + +# SUBARCH tells the usermode build what the underlying arch is. That is set +# first, and if a usermode build is happening, the "ARCH=um" on the command +# line overrides the setting of ARCH below. If a native build is happening, +# then ARCH is assigned, getting whatever value it gets normally, and +# SUBARCH is subsequently ignored. + +SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ + -e s/arm.*/arm/ -e s/sa110/arm/ \ + -e s/s390x/s390/ -e s/parisc64/parisc/ \ + -e s/ppc64/powerpc/ ) + +# Cross compiling and selecting different set of gcc/bin-utils +# --------------------------------------------------------------------------- +# +# When performing cross compilation for other architectures ARCH shall be set +# to the target architecture. (See arch/* for the possibilities). +# ARCH can be set during invocation of make: +# make ARCH=ia64 +# Another way is to have ARCH set in the environment. +# The default ARCH is the host where make is executed. + +# CROSS_COMPILE specify the prefix used for all executables used +# during compilation. Only gcc and related bin-utils executables +# are prefixed with $(CROSS_COMPILE). +# CROSS_COMPILE can be set on the command line +# make CROSS_COMPILE=ia64-linux- +# Alternatively CROSS_COMPILE can be set in the environment. +# Default value for CROSS_COMPILE is not to prefix executables +# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile + +ARCH ?= $(SUBARCH) +CROSS_COMPILE ?= + +# Architecture as present in compile.h +UTS_MACHINE := $(ARCH) + +# SHELL used by kbuild +CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ + else if [ -x /bin/bash ]; then echo /bin/bash; \ + else echo sh; fi ; fi) + +HOSTCC = gcc +HOSTCXX = g++ +HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer +HOSTCXXFLAGS = -O2 + +# Decide whether to build built-in, modular, or both. +# Normally, just do built-in. + +KBUILD_MODULES := +KBUILD_BUILTIN := 1 + +# If we have only "make modules", don't compile built-in objects. +# When we're building modules with modversions, we need to consider +# the built-in objects during the descend as well, in order to +# make sure the checksums are uptodate before we record them. + +ifeq ($(MAKECMDGOALS),modules) + KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) +endif + +# If we have "make modules", compile modules +# in addition to whatever we do anyway. +# Just "make" or "make all" shall build modules as well + +ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) + KBUILD_MODULES := 1 +endif + +ifeq ($(MAKECMDGOALS),) + KBUILD_MODULES := 1 +endif + +export KBUILD_MODULES KBUILD_BUILTIN +export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD + +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing wil be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's usefull +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. + +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif + +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(findstring s,$(MAKEFLAGS)),) + quiet=silent_ +endif + +export quiet Q KBUILD_VERBOSE + +###### +# cc support functions to be used (only) in arch/$(ARCH)/Makefile +# See documentation in Documentation/kbuild/makefiles.txt + +# cc-option +# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586) + +cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ + > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;) + +# For backward compatibility +check_gcc = $(warning check_gcc is deprecated - use cc-option) \ + $(call cc-option, $(1),$(2)) + +# cc-option-yn +# Usage: flag := $(call cc-option-yn, -march=winchip-c6) +cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ + > /dev/null 2>&1; then echo "y"; else echo "n"; fi;) + +# cc-option-align +# Prefix align with either -falign or -malign +cc-option-align = $(subst -functions=0,,\ + $(call cc-option,-falign-functions=0,-malign-functions=0)) + +# cc-version +# Usage gcc-ver := $(call cc-version $(CC)) +cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \ + $(if $(1), $(1), $(CC))) + + +# Look for make include files relative to root of kernel src +MAKEFLAGS += --include-dir=$(srctree) + +# We need some generic definitions +include $(srctree)/scripts/Kbuild.include + +# For maximum performance (+ possibly random breakage, uncomment +# the following) + +#MAKEFLAGS += -rR + +# Make variables (CC, etc...) + +AS = $(CROSS_COMPILE)as +LD = $(CROSS_COMPILE)ld +CC = $(CROSS_COMPILE)gcc +CPP = $(CC) -E +AR = $(CROSS_COMPILE)ar +NM = $(CROSS_COMPILE)nm +STRIP = $(CROSS_COMPILE)strip +OBJCOPY = $(CROSS_COMPILE)objcopy +OBJDUMP = $(CROSS_COMPILE)objdump +AWK = awk +GENKSYMS = scripts/genksyms/genksyms +DEPMOD = /sbin/depmod +KALLSYMS = scripts/kallsyms +PERL = perl +CHECK = sparse + +CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF) +MODFLAGS = -DMODULE +CFLAGS_MODULE = $(MODFLAGS) +AFLAGS_MODULE = $(MODFLAGS) +LDFLAGS_MODULE = -r +CFLAGS_KERNEL = +AFLAGS_KERNEL = + + +# Use LINUXINCLUDE when you must reference the include/ directory. +# Needed to be compatible with the O= option +LINUXINCLUDE := -Iinclude \ + $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ + -include include/linux/autoconf.h + +CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) + +CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -fno-common \ + -ffreestanding +AFLAGS := -D__ASSEMBLY__ + +export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \ + ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ + CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ + HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS + +export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS +export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE +export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE + +# When compiling out-of-tree modules, put MODVERDIR in the module +# tree rather than in the kernel tree. The kernel tree might +# even be read-only. +export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions + +# Files to ignore in find ... statements + +RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o +export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git + +# =========================================================================== +# Rules shared between *config targets and build targets + +# Basic helpers built in scripts/ +.PHONY: scripts_basic +scripts_basic: + $(Q)$(MAKE) $(build)=scripts/basic + +# To avoid any implicit rule to kick in, define an empty command. +scripts/basic/%: scripts_basic ; + +.PHONY: outputmakefile +# outputmakefile generate a Makefile to be placed in output directory, if +# using a seperate output directory. This allows convinient use +# of make in output directory +outputmakefile: + $(Q)if test ! $(srctree) -ef $(objtree); then \ + $(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ + $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \ + > $(objtree)/Makefile; \ + echo ' GEN $(objtree)/Makefile'; \ + fi + +# To make sure we do not include .config for any of the *config targets +# catch them early, and hand them over to scripts/kconfig/Makefile +# It is allowed to specify more targets when calling make, including +# mixing *config targets and build targets. +# For example 'make oldconfig all'. +# Detect when mixed targets is specified, and make a second invocation +# of make so .config is not included in this case either (for *config). + +no-dot-config-targets := clean mrproper distclean \ + cscope TAGS tags help %docs check% + +config-targets := 0 +mixed-targets := 0 +dot-config := 1 + +ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) + ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) + dot-config := 0 + endif +endif + +ifeq ($(KBUILD_EXTMOD),) + ifneq ($(filter config %config,$(MAKECMDGOALS)),) + config-targets := 1 + ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) + mixed-targets := 1 + endif + endif +endif + +ifeq ($(mixed-targets),1) +# =========================================================================== +# We're called with mixed targets (*config and build targets). +# Handle them one by one. + +%:: FORCE + $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ + +else +ifeq ($(config-targets),1) +# =========================================================================== +# *config targets only - make sure prerequisites are updated, and descend +# in scripts/kconfig to make the *config target + +# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. +# KBUILD_DEFCONFIG may point out an alternative default configuration +# used for 'make defconfig' +include $(srctree)/arch/$(ARCH)/Makefile +export KBUILD_DEFCONFIG + +config %config: scripts_basic outputmakefile FORCE + $(Q)mkdir -p include/linux + $(Q)$(MAKE) $(build)=scripts/kconfig $@ + +else +# =========================================================================== +# Build targets only - this includes vmlinux, arch specific targets, clean +# targets and others. In general all targets except *config targets. + +ifeq ($(KBUILD_EXTMOD),) +# Additional helpers built in scripts/ +# Carefully list dependencies so we do not try to build scripts twice +# in parrallel +.PHONY: scripts +scripts: scripts_basic include/config/MARKER + $(Q)$(MAKE) $(build)=$(@) + +scripts_basic: include/linux/autoconf.h + +# Objects we will link into vmlinux / subdirs we need to visit +init-y := init/ +drivers-y := drivers/ sound/ +net-y := net/ +libs-y := lib/ +core-y := usr/ +endif # KBUILD_EXTMOD + +ifeq ($(dot-config),1) +# In this section, we need .config + +# Read in dependencies to all Kconfig* files, make sure to run +# oldconfig if changes are detected. +-include .config.cmd + +include .config + +# If .config needs to be updated, it will be done via the dependency +# that autoconf has on .config. +# To avoid any implicit rule to kick in, define an empty command +.config: ; + +# If .config is newer than include/linux/autoconf.h, someone tinkered +# with it and forgot to run make oldconfig +include/linux/autoconf.h: .config + $(Q)mkdir -p include/linux + $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig +else +# Dummy target needed, because used as prerequisite +include/linux/autoconf.h: ; +endif + +# The all: target is the default when no target is given on the +# command line. +# This allow a user to issue only 'make' to build a kernel including modules +# Defaults vmlinux but it is usually overriden in the arch makefile +all: vmlinux + +ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE +CFLAGS += -Os +else +CFLAGS += -O2 +endif + +#Add align options if CONFIG_CC_* is not equal to 0 +add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1))) +CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions) +CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels) +CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops) +CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps) + +ifdef CONFIG_FRAME_POINTER +CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,) +else +CFLAGS += -fomit-frame-pointer +endif + +ifdef CONFIG_DEBUG_INFO +CFLAGS += -g +endif + +include $(srctree)/arch/$(ARCH)/Makefile + +# arch Makefile may override CC so keep this after arch Makefile is included +NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) +CHECKFLAGS += $(NOSTDINC_FLAGS) + +# warn about C99 declaration after statement +CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) + +# disable pointer signedness warnings in gcc 4.0 +CFLAGS += $(call cc-option,-Wno-pointer-sign,) + +# Default kernel image to build when no specific target is given. +# KBUILD_IMAGE may be overruled on the commandline or +# set in the environment +# Also any assignments in arch/$(ARCH)/Makefile take precedence over +# this default value +export KBUILD_IMAGE ?= vmlinux + +# +# INSTALL_PATH specifies where to place the updated kernel and system map +# images. Default is /boot, but you can set it to other values +export INSTALL_PATH ?= /boot + +# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests +# and try to determine if the current source tree is a release tree, of any sort, +# or if is a pure development tree. +# +# A 'release tree' is any tree with a git TAG associated +# with it. The primary goal of this is to make it safe for a native +# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to +# continue developing against the current Linus tree, without having the Linus +# tree overwrite the 2.6.9 tree when installed. +# +# Currently, only git is supported. +# Other SCMs can edit scripts/setlocalversion and add the appropriate +# checks as needed. + + +ifdef CONFIG_LOCALVERSION_AUTO + localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree)) + LOCALVERSION := $(LOCALVERSION)$(localversion-auto) +endif + +# +# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory +# relocations required by build roots. This is not defined in the +# makefile but the arguement can be passed to make if needed. +# + +MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) +export MODLIB + + +ifeq ($(KBUILD_EXTMOD),) +core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ + +vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ + $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ + $(net-y) $(net-m) $(libs-y) $(libs-m))) + +vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ + $(init-n) $(init-) \ + $(core-n) $(core-) $(drivers-n) $(drivers-) \ + $(net-n) $(net-) $(libs-n) $(libs-)))) + +init-y := $(patsubst %/, %/built-in.o, $(init-y)) +core-y := $(patsubst %/, %/built-in.o, $(core-y)) +drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y)) +net-y := $(patsubst %/, %/built-in.o, $(net-y)) +libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) +libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) +libs-y := $(libs-y1) $(libs-y2) + +# Build vmlinux +# --------------------------------------------------------------------------- +# vmlinux is build from the objects selected by $(vmlinux-init) and +# $(vmlinux-main). Most are built-in.o files from top-level directories +# in the kernel tree, others are specified in arch/$(ARCH)Makefile. +# Ordering when linking is important, and $(vmlinux-init) must be first. +# +# vmlinux +# ^ +# | +# +-< $(vmlinux-init) +# | +--< init/version.o + more +# | +# +--< $(vmlinux-main) +# | +--< driver/built-in.o mm/built-in.o + more +# | +# +-< kallsyms.o (see description in CONFIG_KALLSYMS section) +# +# vmlinux version (uname -v) cannot be updated during normal +# descending-into-subdirs phase since we do not yet know if we need to +# update vmlinux. +# Therefore this step is delayed until just before final link of vmlinux - +# except in the kallsyms case where it is done just before adding the +# symbols to the kernel. +# +# System.map is generated to document addresses of all kernel symbols + +vmlinux-init := $(head-y) $(init-y) +vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y) +vmlinux-all := $(vmlinux-init) $(vmlinux-main) +vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds + +# Rule to link vmlinux - also used during CONFIG_KALLSYMS +# May be overridden by arch/$(ARCH)/Makefile +quiet_cmd_vmlinux__ ?= LD $@ + cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \ + -T $(vmlinux-lds) $(vmlinux-init) \ + --start-group $(vmlinux-main) --end-group \ + $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) + +# Generate new vmlinux version +quiet_cmd_vmlinux_version = GEN .version + cmd_vmlinux_version = set -e; \ + if [ ! -r .version ]; then \ + rm -f .version; \ + echo 1 >.version; \ + else \ + mv .version .old_version; \ + expr 0$$(cat .old_version) + 1 >.version; \ + fi; \ + $(MAKE) $(build)=init + +# Generate System.map +quiet_cmd_sysmap = SYSMAP + cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap + +# Link of vmlinux +# If CONFIG_KALLSYMS is set .version is already updated +# Generate System.map and verify that the content is consistent +# Use + in front of the vmlinux_version rule to silent warning with make -j2 +# First command is ':' to allow us to use + in front of the rule +define rule_vmlinux__ + : + $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) + + $(call cmd,vmlinux__) + $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd + + $(Q)$(if $($(quiet)cmd_sysmap), \ + echo ' $($(quiet)cmd_sysmap) System.map' &&) \ + $(cmd_sysmap) $@ System.map; \ + if [ $$? -ne 0 ]; then \ + rm -f $@; \ + /bin/false; \ + fi; + $(verify_kallsyms) +endef + + +ifdef CONFIG_KALLSYMS +# Generate section listing all symbols and add it into vmlinux $(kallsyms.o) +# It's a three stage process: +# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is +# empty +# Running kallsyms on that gives us .tmp_kallsyms1.o with +# the right size - vmlinux version (uname -v) is updated during this step +# o .tmp_vmlinux2 now has a __kallsyms section of the right size, +# but due to the added section, some addresses have shifted. +# From here, we generate a correct .tmp_kallsyms2.o +# o The correct .tmp_kallsyms2.o is linked into the final vmlinux. +# o Verify that the System.map from vmlinux matches the map from +# .tmp_vmlinux2, just in case we did not generate kallsyms correctly. +# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using +# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a +# temporary bypass to allow the kernel to be built while the +# maintainers work out what went wrong with kallsyms. + +ifdef CONFIG_KALLSYMS_EXTRA_PASS +last_kallsyms := 3 +else +last_kallsyms := 2 +endif + +kallsyms.o := .tmp_kallsyms$(last_kallsyms).o + +define verify_kallsyms + $(Q)$(if $($(quiet)cmd_sysmap), \ + echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ + $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map + $(Q)cmp -s System.map .tmp_System.map || \ + (echo Inconsistent kallsyms data; \ + echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \ + rm .tmp_kallsyms* ; /bin/false ) +endef + +# Update vmlinux version before link +# Use + in front of this rule to silent warning about make -j1 +# First command is ':' to allow us to use + in front of this rule +cmd_ksym_ld = $(cmd_vmlinux__) +define rule_ksym_ld + : + +$(call cmd,vmlinux_version) + $(call cmd,vmlinux__) + $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd +endef + +# Generate .S file with all kernel symbols +quiet_cmd_kallsyms = KSYM $@ + cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ + $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ + +.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE + $(call if_changed_dep,as_o_S) + +.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) + $(call cmd,kallsyms) + +# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version +.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE + $(call if_changed_rule,ksym_ld) + +.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE + $(call if_changed,vmlinux__) + +.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE + $(call if_changed,vmlinux__) + +# Needs to visit scripts/ before $(KALLSYMS) can be used. +$(KALLSYMS): scripts ; + +# Generate some data for debugging strange kallsyms problems +debug_kallsyms: .tmp_map$(last_kallsyms) + +.tmp_map%: .tmp_vmlinux% FORCE + ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@ + +.tmp_map3: .tmp_map2 + +.tmp_map2: .tmp_map1 + +endif # ifdef CONFIG_KALLSYMS + +# vmlinux image - including updated kernel symbols +vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE + $(call if_changed_rule,vmlinux__) + $(Q)rm -f .old_version + +# The actual objects are generated when descending, +# make sure no implicit rule kicks in +$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; + +# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Preset locale variables to speed up the build process. Limit locale +# tweaks to this spot to avoid wrong language settings when running +# make menuconfig etc. +# Error messages still appears in the original language + +.PHONY: $(vmlinux-dirs) +$(vmlinux-dirs): prepare scripts + $(Q)$(MAKE) $(build)=$@ + +# Things we need to do before we recursively start building the kernel +# or the modules are listed in "prepare". +# A multi level approach is used. prepareN is processed before prepareN-1. +# archprepare is used in arch Makefiles and when processed asm symlink, +# version.h and scripts_basic is processed / created. + +# Listed in dependency order +.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3 + +# prepare-all is deprecated, use prepare as valid replacement +.PHONY: prepare-all + +# prepare3 is used to check if we are building in a separate output directory, +# and if so do: +# 1) Check that make has not been executed in the kernel src $(srctree) +# 2) Create the include2 directory, used for the second asm symlink + +prepare3: +ifneq ($(KBUILD_SRC),) + @echo ' Using $(srctree) as source for kernel' + $(Q)if [ -f $(srctree)/.config ]; then \ + echo " $(srctree) is not clean, please run 'make mrproper'";\ + echo " in the '$(srctree)' directory.";\ + /bin/false; \ + fi; + $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; + $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm +endif + +# prepare2 creates a makefile if using a separate output directory +prepare2: prepare3 outputmakefile + +prepare1: prepare2 include/linux/version.h include/asm \ + include/config/MARKER +ifneq ($(KBUILD_MODULES),) + $(Q)rm -rf $(MODVERDIR) + $(Q)mkdir -p $(MODVERDIR) +endif + +archprepare: prepare1 scripts_basic + +prepare0: archprepare FORCE + $(Q)$(MAKE) $(build)=. + +# All the preparing.. +prepare prepare-all: prepare0 + +# Leave this as default for preprocessing vmlinux.lds.S, which is now +# done in arch/$(ARCH)/kernel/Makefile + +export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) + +# Single targets +# --------------------------------------------------------------------------- + +%.s: %.c scripts FORCE + $(Q)$(MAKE) $(build)=$(@D) $@ +%.i: %.c scripts FORCE + $(Q)$(MAKE) $(build)=$(@D) $@ +%.o: %.c scripts FORCE + $(Q)$(MAKE) $(build)=$(@D) $@ +%.ko: scripts FORCE + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o) + $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost +%/: scripts prepare FORCE + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) +%.lst: %.c scripts FORCE + $(Q)$(MAKE) $(build)=$(@D) $@ +%.s: %.S scripts FORCE + $(Q)$(MAKE) $(build)=$(@D) $@ +%.o: %.S scripts FORCE + $(Q)$(MAKE) $(build)=$(@D) $@ + +# FIXME: The asm symlink changes when $(ARCH) changes. That's +# hard to detect, but I suppose "make mrproper" is a good idea +# before switching between archs anyway. + +include/asm: + @echo ' SYMLINK $@ -> include/asm-$(ARCH)' + $(Q)if [ ! -d include ]; then mkdir -p include; fi; + @ln -fsn asm-$(ARCH) $@ + +# Split autoconf.h into include/linux/config/* + +include/config/MARKER: scripts/basic/split-include include/linux/autoconf.h + @echo ' SPLIT include/linux/autoconf.h -> include/config/*' + @scripts/basic/split-include include/linux/autoconf.h include/config + @touch $@ + +# Generate some files +# --------------------------------------------------------------------------- + +# KERNELRELEASE can change from a few different places, meaning version.h +# needs to be updated, so this check is forced on all builds + +uts_len := 64 + +define filechk_version.h + if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ + echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ + exit 1; \ + fi; \ + (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ + echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ + echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ + ) +endef + +include/linux/version.h: $(srctree)/Makefile FORCE + $(call filechk,version.h) + +# --------------------------------------------------------------------------- + +.PHONY: depend dep +depend dep: + @echo '*** Warning: make $@ is unnecessary now.' + +# --------------------------------------------------------------------------- +# Modules + +ifdef CONFIG_MODULES + +# By default, build modules as well + +all: modules + +# Build modules + +.PHONY: modules +modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) + @echo ' Building modules, stage 2.'; + $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost + + +# Target to prepare building external modules +.PHONY: modules_prepare +modules_prepare: prepare scripts + +# Target to install modules +.PHONY: modules_install +modules_install: _modinst_ _modinst_post + +.PHONY: _modinst_ +_modinst_: + @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \ + echo "Warning: you may need to install module-init-tools"; \ + echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ + sleep 1; \ + fi + @rm -rf $(MODLIB)/kernel + @rm -f $(MODLIB)/source + @mkdir -p $(MODLIB)/kernel + @ln -s $(srctree) $(MODLIB)/source + @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ + rm -f $(MODLIB)/build ; \ + ln -s $(objtree) $(MODLIB)/build ; \ + fi + $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst + +# If System.map exists, run depmod. This deliberately does not have a +# dependency on System.map since that would run the dependency tree on +# vmlinux. This depmod is only for convenience to give the initial +# boot a modules.dep even before / is mounted read-write. However the +# boot script depmod is the master version. +ifeq "$(strip $(INSTALL_MOD_PATH))" "" +depmod_opts := +else +depmod_opts := -b $(INSTALL_MOD_PATH) -r +endif +.PHONY: _modinst_post +_modinst_post: _modinst_ + if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi + +else # CONFIG_MODULES + +# Modules not configured +# --------------------------------------------------------------------------- + +modules modules_install: FORCE + @echo + @echo "The present kernel configuration has modules disabled." + @echo "Type 'make config' and enable loadable module support." + @echo "Then build a kernel with module support enabled." + @echo + @exit 1 + +endif # CONFIG_MODULES + +### +# Cleaning is done on three levels. +# make clean Delete most generated files +# Leave enough to build external modules +# make mrproper Delete the current configuration, and all generated files +# make distclean Remove editor backup files, patch leftover files and the like + +# Directories & files removed with 'make clean' +CLEAN_DIRS += $(MODVERDIR) +CLEAN_FILES += vmlinux System.map \ + .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map + +# Directories & files removed with 'make mrproper' +MRPROPER_DIRS += include/config include2 +MRPROPER_FILES += .config .config.old include/asm .version \ + include/linux/autoconf.h include/linux/version.h \ + Module.symvers tags TAGS cscope* + +# clean - Delete most, but leave enough to build external modules +# +clean: rm-dirs := $(CLEAN_DIRS) +clean: rm-files := $(CLEAN_FILES) +clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs)) + +.PHONY: $(clean-dirs) clean archclean +$(clean-dirs): + $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) + +clean: archclean $(clean-dirs) + $(call cmd,rmdirs) + $(call cmd,rmfiles) + @find . $(RCS_FIND_IGNORE) \ + \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ + -type f -print | xargs rm -f + +# mrproper - Delete all generated files, including .config +# +mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) +mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) +mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts) + +.PHONY: $(mrproper-dirs) mrproper archmrproper +$(mrproper-dirs): + $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) + +mrproper: clean archmrproper $(mrproper-dirs) + $(call cmd,rmdirs) + $(call cmd,rmfiles) + +# distclean +# +.PHONY: distclean + +distclean: mrproper + @find $(srctree) $(RCS_FIND_IGNORE) \ + \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ + -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ + -o -name '.*.rej' -o -size 0 \ + -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ + -type f -print | xargs rm -f + + +# Packaging of the kernel to various formats +# --------------------------------------------------------------------------- +# rpm target kept for backward compatibility +package-dir := $(srctree)/scripts/package + +.PHONY: %-pkg rpm + +%pkg: FORCE + $(Q)$(MAKE) -f $(package-dir)/Makefile $@ +rpm: FORCE + $(Q)$(MAKE) -f $(package-dir)/Makefile $@ + + +# Brief documentation of the typical targets used +# --------------------------------------------------------------------------- + +boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig) +boards := $(notdir $(boards)) + +help: + @echo 'Cleaning targets:' + @echo ' clean - remove most generated files but keep the config' + @echo ' mrproper - remove all generated files + config + various backup files' + @echo '' + @echo 'Configuration targets:' + @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help + @echo '' + @echo 'Other generic targets:' + @echo ' all - Build all targets marked with [*]' + @echo '* vmlinux - Build the bare kernel' + @echo '* modules - Build all modules' + @echo ' modules_install - Install all modules' + @echo ' dir/ - Build all files in dir and below' + @echo ' dir/file.[ois] - Build specified target only' + @echo ' dir/file.ko - Build module including final link' + @echo ' rpm - Build a kernel as an RPM package' + @echo ' tags/TAGS - Generate tags file for editors' + @echo ' cscope - Generate cscope index' + @echo ' kernelrelease - Output the release version string' + @echo '' + @echo 'Static analysers' + @echo ' buildcheck - List dangling references to vmlinux discarded sections' + @echo ' and init sections from non-init sections' + @echo ' checkstack - Generate a list of stack hogs' + @echo ' namespacecheck - Name space analysis on compiled kernel' + @echo '' + @echo 'Kernel packaging:' + @$(MAKE) -f $(package-dir)/Makefile help + @echo '' + @echo 'Documentation targets:' + @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp + @echo '' + @echo 'Architecture specific targets ($(ARCH)):' + @$(if $(archhelp),$(archhelp),\ + echo ' No architecture specific help defined for $(ARCH)') + @echo '' + @$(if $(boards), \ + $(foreach b, $(boards), \ + printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ + echo '') + + @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' + @echo ' make O=dir [targets] Locate all output files in "dir", including .config' + @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)' + @echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)' + @echo '' + @echo 'Execute "make" or "make all" to build all targets marked with [*] ' + @echo 'For further info see the ./README file' + + +# Documentation targets +# --------------------------------------------------------------------------- +%docs: scripts_basic FORCE + $(Q)$(MAKE) $(build)=Documentation/DocBook $@ + +else # KBUILD_EXTMOD + +### +# External module support. +# When building external modules the kernel used as basis is considered +# read-only, and no consistency checks are made and the make +# system is not used on the basis kernel. If updates are required +# in the basis kernel ordinary make commands (without M=...) must +# be used. +# +# The following are the only valid targets when building external +# modules. +# make M=dir clean Delete all automatically generated files +# make M=dir modules Make all modules in specified dir +# make M=dir Same as 'make M=dir modules' +# make M=dir modules_install +# Install the modules build in the module directory +# Assumes install directory is already created + +# We are always building modules +KBUILD_MODULES := 1 +.PHONY: crmodverdir +crmodverdir: + $(Q)mkdir -p $(MODVERDIR) + +.PHONY: $(objtree)/Module.symvers +$(objtree)/Module.symvers: + @test -e $(objtree)/Module.symvers || ( \ + echo; \ + echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \ + echo " is missing; modules will have no dependencies and modversions."; \ + echo ) + +module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD)) +.PHONY: $(module-dirs) modules +$(module-dirs): crmodverdir $(objtree)/Module.symvers + $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) + +modules: $(module-dirs) + @echo ' Building modules, stage 2.'; + $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost + +.PHONY: modules_install +modules_install: + $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst + +clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD)) + +.PHONY: $(clean-dirs) clean +$(clean-dirs): + $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) + +clean: rm-dirs := $(MODVERDIR) +clean: $(clean-dirs) + $(call cmd,rmdirs) + @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \ + \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ + -type f -print | xargs rm -f + +help: + @echo ' Building external modules.' + @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' + @echo '' + @echo ' modules - default target, build the module(s)' + @echo ' modules_install - install the module' + @echo ' clean - remove generated files in module directory only' + @echo '' +endif # KBUILD_EXTMOD + +# Generate tags for editors +# --------------------------------------------------------------------------- + +#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set +#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file. +#Adding $(srctree) adds about 20M on i386 to the size of the output file! + +ifeq ($(src),$(obj)) +__srctree = +else +__srctree = $(srctree)/ +endif + +ifeq ($(ALLSOURCE_ARCHS),) +ifeq ($(ARCH),um) +ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH) +else +ALLINCLUDE_ARCHS := $(ARCH) +endif +else +#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour. +ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS) +endif + +ALLSOURCE_ARCHS := $(ARCH) + +define all-sources + ( find $(__srctree) $(RCS_FIND_IGNORE) \ + \( -name include -o -name arch \) -prune -o \ + -name '*.[chS]' -print; \ + for ARCH in $(ALLSOURCE_ARCHS) ; do \ + find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \ + -name '*.[chS]' -print; \ + done ; \ + find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \ + -name '*.[chS]' -print; \ + find $(__srctree)include $(RCS_FIND_IGNORE) \ + \( -name config -o -name 'asm-*' \) -prune \ + -o -name '*.[chS]' -print; \ + for ARCH in $(ALLINCLUDE_ARCHS) ; do \ + find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \ + -name '*.[chS]' -print; \ + done ; \ + find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \ + -name '*.[chS]' -print ) +endef + +quiet_cmd_cscope-file = FILELST cscope.files + cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files + +quiet_cmd_cscope = MAKE cscope.out + cmd_cscope = cscope -b + +cscope: FORCE + $(call cmd,cscope-file) + $(call cmd,cscope) + +quiet_cmd_TAGS = MAKE $@ +define cmd_TAGS + rm -f $@; \ + ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \ + $(all-sources) | xargs etags $$ETAGSF -a +endef + +TAGS: FORCE + $(call cmd,TAGS) + + +quiet_cmd_tags = MAKE $@ +define cmd_tags + rm -f $@; \ + CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \ + $(all-sources) | xargs ctags $$CTAGSF -a +endef + +tags: FORCE + $(call cmd,tags) + + +# Scripts to check various things for consistency +# --------------------------------------------------------------------------- + +includecheck: + find * $(RCS_FIND_IGNORE) \ + -name '*.[hcS]' -type f -print | sort \ + | xargs $(PERL) -w scripts/checkincludes.pl + +versioncheck: + find * $(RCS_FIND_IGNORE) \ + -name '*.[hcS]' -type f -print | sort \ + | xargs $(PERL) -w scripts/checkversion.pl + +buildcheck: + $(PERL) $(srctree)/scripts/reference_discarded.pl + $(PERL) $(srctree)/scripts/reference_init.pl + +namespacecheck: + $(PERL) $(srctree)/scripts/namespace.pl + +endif #ifeq ($(config-targets),1) +endif #ifeq ($(mixed-targets),1) + +.PHONY: checkstack +checkstack: + $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ + $(PERL) $(src)/scripts/checkstack.pl $(ARCH) + +kernelrelease: + @echo $(KERNELRELEASE) + +# FIXME Should go into a make.lib or something +# =========================================================================== + +quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) + cmd_rmdirs = rm -rf $(rm-dirs) + +quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) + cmd_rmfiles = rm -f $(rm-files) + + +a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \ + $(NOSTDINC_FLAGS) $(CPPFLAGS) \ + $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o) + +quiet_cmd_as_o_S = AS $@ +cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +# read all saved command lines + +targets := $(wildcard $(sort $(targets))) +cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) + +ifneq ($(cmd_files),) + $(cmd_files): ; # Do not try to update included dependency files + include $(cmd_files) +endif + +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir +# Usage: +# $(Q)$(MAKE) $(clean)=dir +clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj + +endif # skip-makefile + +FORCE: diff -urN oldtree/scripts/kconfig/confdata.c newtree/scripts/kconfig/confdata.c --- oldtree/scripts/kconfig/confdata.c 2006-01-28 19:08:42.000000000 +0000 +++ newtree/scripts/kconfig/confdata.c 2006-01-29 11:07:40.214510512 +0000 @@ -384,20 +384,22 @@ fprintf(out, _("#\n" "# Automatically generated make config: don't edit\n" - "# Linux kernel version: %s\n" + "# Linux kernel version: %s \"%s\"\n" "%s%s" "#\n"), sym_get_string_value(sym), + getenv("NAME"), use_timestamp ? "# " : "", use_timestamp ? ctime(&now) : ""); if (out_h) fprintf(out_h, "/*\n" " * Automatically generated C config: don't edit\n" - " * Linux kernel version: %s\n" + " * Linux kernel version: %s \"%s\"\n" "%s%s" " */\n" "#define AUTOCONF_INCLUDED\n", sym_get_string_value(sym), + getenv("NAME"), use_timestamp ? " * " : "", use_timestamp ? ctime(&now) : ""); diff -urN oldtree/scripts/kconfig/confdata.c.orig newtree/scripts/kconfig/confdata.c.orig --- oldtree/scripts/kconfig/confdata.c.orig 1970-01-01 00:00:00.000000000 +0000 +++ newtree/scripts/kconfig/confdata.c.orig 2006-01-28 19:08:42.000000000 +0000 @@ -0,0 +1,530 @@ +/* + * Copyright (C) 2002 Roman Zippel + * Released under the terms of the GNU GPL v2.0. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define LKC_DIRECT_LINK +#include "lkc.h" + +static void conf_warning(const char *fmt, ...) + __attribute__ ((format (printf, 1, 2))); + +static const char *conf_filename; +static int conf_lineno, conf_warnings, conf_unsaved; + +const char conf_def_filename[] = ".config"; + +const char conf_defname[] = "arch/$ARCH/defconfig"; + +const char *conf_confnames[] = { + ".config", + "/lib/modules/$UNAME_RELEASE/.config", + "/etc/kernel-config", + "/boot/config-$UNAME_RELEASE", + conf_defname, + NULL, +}; + +static void conf_warning(const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + fprintf(stderr, "%s:%d:warning: ", conf_filename, conf_lineno); + vfprintf(stderr, fmt, ap); + fprintf(stderr, "\n"); + va_end(ap); + conf_warnings++; +} + +static char *conf_expand_value(const char *in) +{ + struct symbol *sym; + const char *src; + static char res_value[SYMBOL_MAXLENGTH]; + char *dst, name[SYMBOL_MAXLENGTH]; + + res_value[0] = 0; + dst = name; + while ((src = strchr(in, '$'))) { + strncat(res_value, in, src - in); + src++; + dst = name; + while (isalnum(*src) || *src == '_') + *dst++ = *src++; + *dst = 0; + sym = sym_lookup(name, 0); + sym_calc_value(sym); + strcat(res_value, sym_get_string_value(sym)); + in = src; + } + strcat(res_value, in); + + return res_value; +} + +char *conf_get_default_confname(void) +{ + struct stat buf; + static char fullname[PATH_MAX+1]; + char *env, *name; + + name = conf_expand_value(conf_defname); + env = getenv(SRCTREE); + if (env) { + sprintf(fullname, "%s/%s", env, name); + if (!stat(fullname, &buf)) + return fullname; + } + return name; +} + +int conf_read_simple(const char *name) +{ + FILE *in = NULL; + char line[1024]; + char *p, *p2; + struct symbol *sym; + int i; + + if (name) { + in = zconf_fopen(name); + } else { + const char **names = conf_confnames; + while ((name = *names++)) { + name = conf_expand_value(name); + in = zconf_fopen(name); + if (in) { + printf(_("#\n" + "# using defaults found in %s\n" + "#\n"), name); + break; + } + } + } + if (!in) + return 1; + + conf_filename = name; + conf_lineno = 0; + conf_warnings = 0; + conf_unsaved = 0; + + for_all_symbols(i, sym) { + sym->flags |= SYMBOL_NEW | SYMBOL_CHANGED; + if (sym_is_choice(sym)) + sym->flags &= ~SYMBOL_NEW; + sym->flags &= ~SYMBOL_VALID; + switch (sym->type) { + case S_INT: + case S_HEX: + case S_STRING: + if (sym->user.val) + free(sym->user.val); + default: + sym->user.val = NULL; + sym->user.tri = no; + } + } + + while (fgets(line, sizeof(line), in)) { + conf_lineno++; + sym = NULL; + switch (line[0]) { + case '#': + if (memcmp(line + 2, "CONFIG_", 7)) + continue; + p = strchr(line + 9, ' '); + if (!p) + continue; + *p++ = 0; + if (strncmp(p, "is not set", 10)) + continue; + sym = sym_find(line + 9); + if (!sym) { + conf_warning("trying to assign nonexistent symbol %s", line + 9); + break; + } else if (!(sym->flags & SYMBOL_NEW)) { + conf_warning("trying to reassign symbol %s", sym->name); + break; + } + switch (sym->type) { + case S_BOOLEAN: + case S_TRISTATE: + sym->user.tri = no; + sym->flags &= ~SYMBOL_NEW; + break; + default: + ; + } + break; + case 'C': + if (memcmp(line, "CONFIG_", 7)) { + conf_warning("unexpected data"); + continue; + } + p = strchr(line + 7, '='); + if (!p) + continue; + *p++ = 0; + p2 = strchr(p, '\n'); + if (p2) + *p2 = 0; + sym = sym_find(line + 7); + if (!sym) { + conf_warning("trying to assign nonexistent symbol %s", line + 7); + break; + } else if (!(sym->flags & SYMBOL_NEW)) { + conf_warning("trying to reassign symbol %s", sym->name); + break; + } + switch (sym->type) { + case S_TRISTATE: + if (p[0] == 'm') { + sym->user.tri = mod; + sym->flags &= ~SYMBOL_NEW; + break; + } + case S_BOOLEAN: + if (p[0] == 'y') { + sym->user.tri = yes; + sym->flags &= ~SYMBOL_NEW; + break; + } + if (p[0] == 'n') { + sym->user.tri = no; + sym->flags &= ~SYMBOL_NEW; + break; + } + conf_warning("symbol value '%s' invalid for %s", p, sym->name); + break; + case S_STRING: + if (*p++ != '"') + break; + for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) { + if (*p2 == '"') { + *p2 = 0; + break; + } + memmove(p2, p2 + 1, strlen(p2)); + } + if (!p2) { + conf_warning("invalid string found"); + continue; + } + case S_INT: + case S_HEX: + if (sym_string_valid(sym, p)) { + sym->user.val = strdup(p); + sym->flags &= ~SYMBOL_NEW; + } else { + conf_warning("symbol value '%s' invalid for %s", p, sym->name); + continue; + } + break; + default: + ; + } + break; + case '\n': + break; + default: + conf_warning("unexpected data"); + continue; + } + if (sym && sym_is_choice_value(sym)) { + struct symbol *cs = prop_get_symbol(sym_get_choice_prop(sym)); + switch (sym->user.tri) { + case no: + break; + case mod: + if (cs->user.tri == yes) { + conf_warning("%s creates inconsistent choice state", sym->name); + cs->flags |= SYMBOL_NEW; + } + break; + case yes: + if (cs->user.tri != no) { + conf_warning("%s creates inconsistent choice state", sym->name); + cs->flags |= SYMBOL_NEW; + } else + cs->user.val = sym; + break; + } + cs->user.tri = E_OR(cs->user.tri, sym->user.tri); + } + } + fclose(in); + + if (modules_sym) + sym_calc_value(modules_sym); + return 0; +} + +int conf_read(const char *name) +{ + struct symbol *sym; + struct property *prop; + struct expr *e; + int i; + + if (conf_read_simple(name)) + return 1; + + for_all_symbols(i, sym) { + sym_calc_value(sym); + if (sym_is_choice(sym) || (sym->flags & SYMBOL_AUTO)) + goto sym_ok; + if (sym_has_value(sym) && (sym->flags & SYMBOL_WRITE)) { + /* check that calculated value agrees with saved value */ + switch (sym->type) { + case S_BOOLEAN: + case S_TRISTATE: + if (sym->user.tri != sym_get_tristate_value(sym)) + break; + if (!sym_is_choice(sym)) + goto sym_ok; + default: + if (!strcmp(sym->curr.val, sym->user.val)) + goto sym_ok; + break; + } + } else if (!sym_has_value(sym) && !(sym->flags & SYMBOL_WRITE)) + /* no previous value and not saved */ + goto sym_ok; + conf_unsaved++; + /* maybe print value in verbose mode... */ + sym_ok: + if (sym_has_value(sym) && !sym_is_choice_value(sym)) { + if (sym->visible == no) + sym->flags |= SYMBOL_NEW; + switch (sym->type) { + case S_STRING: + case S_INT: + case S_HEX: + if (!sym_string_within_range(sym, sym->user.val)) { + sym->flags |= SYMBOL_NEW; + sym->flags &= ~SYMBOL_VALID; + } + default: + break; + } + } + if (!sym_is_choice(sym)) + continue; + prop = sym_get_choice_prop(sym); + for (e = prop->expr; e; e = e->left.expr) + if (e->right.sym->visible != no) + sym->flags |= e->right.sym->flags & SYMBOL_NEW; + } + + sym_change_count = conf_warnings && conf_unsaved; + + return 0; +} + +int conf_write(const char *name) +{ + FILE *out, *out_h; + struct symbol *sym; + struct menu *menu; + const char *basename; + char dirname[128], tmpname[128], newname[128]; + int type, l; + const char *str; + time_t now; + int use_timestamp = 1; + char *env; + + dirname[0] = 0; + if (name && name[0]) { + struct stat st; + char *slash; + + if (!stat(name, &st) && S_ISDIR(st.st_mode)) { + strcpy(dirname, name); + strcat(dirname, "/"); + basename = conf_def_filename; + } else if ((slash = strrchr(name, '/'))) { + int size = slash - name + 1; + memcpy(dirname, name, size); + dirname[size] = 0; + if (slash[1]) + basename = slash + 1; + else + basename = conf_def_filename; + } else + basename = name; + } else + basename = conf_def_filename; + + sprintf(newname, "%s.tmpconfig.%d", dirname, (int)getpid()); + out = fopen(newname, "w"); + if (!out) + return 1; + out_h = NULL; + if (!name) { + out_h = fopen(".tmpconfig.h", "w"); + if (!out_h) + return 1; + } + sym = sym_lookup("KERNELRELEASE", 0); + sym_calc_value(sym); + time(&now); + env = getenv("KCONFIG_NOTIMESTAMP"); + if (env && *env) + use_timestamp = 0; + + fprintf(out, _("#\n" + "# Automatically generated make config: don't edit\n" + "# Linux kernel version: %s\n" + "%s%s" + "#\n"), + sym_get_string_value(sym), + use_timestamp ? "# " : "", + use_timestamp ? ctime(&now) : ""); + if (out_h) + fprintf(out_h, "/*\n" + " * Automatically generated C config: don't edit\n" + " * Linux kernel version: %s\n" + "%s%s" + " */\n" + "#define AUTOCONF_INCLUDED\n", + sym_get_string_value(sym), + use_timestamp ? " * " : "", + use_timestamp ? ctime(&now) : ""); + + if (!sym_change_count) + sym_clear_all_valid(); + + menu = rootmenu.list; + while (menu) { + sym = menu->sym; + if (!sym) { + if (!menu_is_visible(menu)) + goto next; + str = menu_get_prompt(menu); + fprintf(out, "\n" + "#\n" + "# %s\n" + "#\n", str); + if (out_h) + fprintf(out_h, "\n" + "/*\n" + " * %s\n" + " */\n", str); + } else if (!(sym->flags & SYMBOL_CHOICE)) { + sym_calc_value(sym); + if (!(sym->flags & SYMBOL_WRITE)) + goto next; + sym->flags &= ~SYMBOL_WRITE; + type = sym->type; + if (type == S_TRISTATE) { + sym_calc_value(modules_sym); + if (modules_sym->curr.tri == no) + type = S_BOOLEAN; + } + switch (type) { + case S_BOOLEAN: + case S_TRISTATE: + switch (sym_get_tristate_value(sym)) { + case no: + fprintf(out, "# CONFIG_%s is not set\n", sym->name); + if (out_h) + fprintf(out_h, "#undef CONFIG_%s\n", sym->name); + break; + case mod: + fprintf(out, "CONFIG_%s=m\n", sym->name); + if (out_h) + fprintf(out_h, "#define CONFIG_%s_MODULE 1\n", sym->name); + break; + case yes: + fprintf(out, "CONFIG_%s=y\n", sym->name); + if (out_h) + fprintf(out_h, "#define CONFIG_%s 1\n", sym->name); + break; + } + break; + case S_STRING: + // fix me + str = sym_get_string_value(sym); + fprintf(out, "CONFIG_%s=\"", sym->name); + if (out_h) + fprintf(out_h, "#define CONFIG_%s \"", sym->name); + do { + l = strcspn(str, "\"\\"); + if (l) { + fwrite(str, l, 1, out); + if (out_h) + fwrite(str, l, 1, out_h); + } + str += l; + while (*str == '\\' || *str == '"') { + fprintf(out, "\\%c", *str); + if (out_h) + fprintf(out_h, "\\%c", *str); + str++; + } + } while (*str); + fputs("\"\n", out); + if (out_h) + fputs("\"\n", out_h); + break; + case S_HEX: + str = sym_get_string_value(sym); + if (str[0] != '0' || (str[1] != 'x' && str[1] != 'X')) { + fprintf(out, "CONFIG_%s=%s\n", sym->name, str); + if (out_h) + fprintf(out_h, "#define CONFIG_%s 0x%s\n", sym->name, str); + break; + } + case S_INT: + str = sym_get_string_value(sym); + fprintf(out, "CONFIG_%s=%s\n", sym->name, str); + if (out_h) + fprintf(out_h, "#define CONFIG_%s %s\n", sym->name, str); + break; + } + } + + next: + if (menu->list) { + menu = menu->list; + continue; + } + if (menu->next) + menu = menu->next; + else while ((menu = menu->parent)) { + if (menu->next) { + menu = menu->next; + break; + } + } + } + fclose(out); + if (out_h) { + fclose(out_h); + rename(".tmpconfig.h", "include/linux/autoconf.h"); + file_write_dep(NULL); + } + if (!name || basename != conf_def_filename) { + if (!name) + name = conf_def_filename; + sprintf(tmpname, "%s.old", name); + rename(name, tmpname); + } + sprintf(tmpname, "%s%s", dirname, basename); + if (rename(newname, tmpname)) + return 1; + + sym_change_count = 0; + + return 0; +} diff -urN oldtree/scripts/kconfig/gconf.c newtree/scripts/kconfig/gconf.c --- oldtree/scripts/kconfig/gconf.c 2006-01-28 19:08:42.000000000 +0000 +++ newtree/scripts/kconfig/gconf.c 2006-01-29 11:07:40.215510360 +0000 @@ -275,8 +275,8 @@ /*"style", PANGO_STYLE_OBLIQUE, */ NULL); - sprintf(title, _("Linux Kernel v%s Configuration"), - getenv("KERNELRELEASE")); + sprintf(title, _("Linux Kernel v%s \"%s\" Configuration"), + getenv("KERNELRELEASE"), getenv("NAME")); gtk_window_set_title(GTK_WINDOW(main_wnd), title); gtk_widget_show(main_wnd); diff -urN oldtree/scripts/kconfig/mconf.c newtree/scripts/kconfig/mconf.c --- oldtree/scripts/kconfig/mconf.c 2006-01-28 19:08:42.000000000 +0000 +++ newtree/scripts/kconfig/mconf.c 2006-01-29 11:07:40.216510208 +0000 @@ -1053,8 +1053,8 @@ sym = sym_lookup("KERNELRELEASE", 0); sym_calc_value(sym); - sprintf(menu_backtitle, _("Linux Kernel v%s Configuration"), - sym_get_string_value(sym)); + sprintf(menu_backtitle, _("Linux Kernel v%s \"%s\" Configuration"), + sym_get_string_value(sym), getenv("NAME")); mode = getenv("MENUCONFIG_MODE"); if (mode) { diff -urN oldtree/scripts/kconfig/mconf.c.orig newtree/scripts/kconfig/mconf.c.orig --- oldtree/scripts/kconfig/mconf.c.orig 1970-01-01 00:00:00.000000000 +0000 +++ newtree/scripts/kconfig/mconf.c.orig 2006-01-28 19:08:42.000000000 +0000 @@ -0,0 +1,1098 @@ +/* + * Copyright (C) 2002 Roman Zippel + * Released under the terms of the GNU GPL v2.0. + * + * Introduced single menu mode (show all sub-menus in one large tree). + * 2002-11-06 Petr Baudis + * + * i18n, 2005, Arnaldo Carvalho de Melo + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LKC_DIRECT_LINK +#include "lkc.h" + +static char menu_backtitle[128]; +static const char mconf_readme[] = N_( +"Overview\n" +"--------\n" +"Some kernel features may be built directly into the kernel.\n" +"Some may be made into loadable runtime modules. Some features\n" +"may be completely removed altogether. There are also certain\n" +"kernel parameters which are not really features, but must be\n" +"entered in as decimal or hexadecimal numbers or possibly text.\n" +"\n" +"Menu items beginning with [*], or [ ] represent features\n" +"configured to be built in, modularized or removed respectively.\n" +"Pointed brackets <> represent module capable features.\n" +"\n" +"To change any of these features, highlight it with the cursor\n" +"keys and press to build it in, to make it a module or\n" +" to removed it. You may also press the to cycle\n" +"through the available options (ie. Y->N->M->Y).\n" +"\n" +"Some additional keyboard hints:\n" +"\n" +"Menus\n" +"----------\n" +"o Use the Up/Down arrow keys (cursor keys) to highlight the item\n" +" you wish to change or submenu wish to select and press .\n" +" Submenus are designated by \"--->\".\n" +"\n" +" Shortcut: Press the option's highlighted letter (hotkey).\n" +" Pressing a hotkey more than once will sequence\n" +" through all visible items which use that hotkey.\n" +"\n" +" You may also use the and keys to scroll\n" +" unseen options into view.\n" +"\n" +"o To exit a menu use the cursor keys to highlight the button\n" +" and press .\n" +"\n" +" Shortcut: Press or or if there is no hotkey\n" +" using those letters. You may press a single , but\n" +" there is a delayed response which you may find annoying.\n" +"\n" +" Also, the and cursor keys will cycle between and\n" +" \n" +"\n" +"\n" +"Data Entry\n" +"-----------\n" +"o Enter the requested information and press \n" +" If you are entering hexadecimal values, it is not necessary to\n" +" add the '0x' prefix to the entry.\n" +"\n" +"o For help, use the or cursor keys to highlight the help option\n" +" and press . You can try as well.\n" +"\n" +"\n" +"Text Box (Help Window)\n" +"--------\n" +"o Use the cursor keys to scroll up/down/left/right. The VI editor\n" +" keys h,j,k,l function here as do and for those\n" +" who are familiar with less and lynx.\n" +"\n" +"o Press , , or to exit.\n" +"\n" +"\n" +"Alternate Configuration Files\n" +"-----------------------------\n" +"Menuconfig supports the use of alternate configuration files for\n" +"those who, for various reasons, find it necessary to switch\n" +"between different kernel configurations.\n" +"\n" +"At the end of the main menu you will find two options. One is\n" +"for saving the current configuration to a file of your choosing.\n" +"The other option is for loading a previously saved alternate\n" +"configuration.\n" +"\n" +"Even if you don't use alternate configuration files, but you\n" +"find during a Menuconfig session that you have completely messed\n" +"up your settings, you may use the \"Load Alternate...\" option to\n" +"restore your previously saved settings from \".config\" without\n" +"restarting Menuconfig.\n" +"\n" +"Other information\n" +"-----------------\n" +"If you use Menuconfig in an XTERM window make sure you have your\n" +"$TERM variable set to point to a xterm definition which supports color.\n" +"Otherwise, Menuconfig will look rather bad. Menuconfig will not\n" +"display correctly in a RXVT window because rxvt displays only one\n" +"intensity of color, bright.\n" +"\n" +"Menuconfig will display larger menus on screens or xterms which are\n" +"set to display more than the standard 25 row by 80 column geometry.\n" +"In order for this to work, the \"stty size\" command must be able to\n" +"display the screen's current row and column geometry. I STRONGLY\n" +"RECOMMEND that you make sure you do NOT have the shell variables\n" +"LINES and COLUMNS exported into your environment. Some distributions\n" +"export those variables via /etc/profile. Some ncurses programs can\n" +"become confused when those variables (LINES & COLUMNS) don't reflect\n" +"the true screen size.\n" +"\n" +"Optional personality available\n" +"------------------------------\n" +"If you prefer to have all of the kernel options listed in a single\n" +"menu, rather than the default multimenu hierarchy, run the menuconfig\n" +"with MENUCONFIG_MODE environment variable set to single_menu. Example:\n" +"\n" +"make MENUCONFIG_MODE=single_menu menuconfig\n" +"\n" +" will then unroll the appropriate category, or enfold it if it\n" +"is already unrolled.\n" +"\n" +"Note that this mode can eventually be a little more CPU expensive\n" +"(especially with a larger number of unrolled categories) than the\n" +"default mode.\n"), +menu_instructions[] = N_( + "Arrow keys navigate the menu. " + " selects submenus --->. " + "Highlighted letters are hotkeys. " + "Pressing includes, excludes, modularizes features. " + "Press to exit, for Help, for Search. " + "Legend: [*] built-in [ ] excluded module < > module capable"), +radiolist_instructions[] = N_( + "Use the arrow keys to navigate this window or " + "press the hotkey of the item you wish to select " + "followed by the . " + "Press for additional information about this option."), +inputbox_instructions_int[] = N_( + "Please enter a decimal value. " + "Fractions will not be accepted. " + "Use the key to move from the input field to the buttons below it."), +inputbox_instructions_hex[] = N_( + "Please enter a hexadecimal value. " + "Use the key to move from the input field to the buttons below it."), +inputbox_instructions_string[] = N_( + "Please enter a string value. " + "Use the key to move from the input field to the buttons below it."), +setmod_text[] = N_( + "This feature depends on another which has been configured as a module.\n" + "As a result, this feature will be built as a module."), +nohelp_text[] = N_( + "There is no help available for this kernel option.\n"), +load_config_text[] = N_( + "Enter the name of the configuration file you wish to load. " + "Accept the name shown to restore the configuration you " + "last retrieved. Leave blank to abort."), +load_config_help[] = N_( + "\n" + "For various reasons, one may wish to keep several different kernel\n" + "configurations available on a single machine.\n" + "\n" + "If you have saved a previous configuration in a file other than the\n" + "kernel's default, entering the name of the file here will allow you\n" + "to modify that configuration.\n" + "\n" + "If you are uncertain, then you have probably never used alternate\n" + "configuration files. You should therefor leave this blank to abort.\n"), +save_config_text[] = N_( + "Enter a filename to which this configuration should be saved " + "as an alternate. Leave blank to abort."), +save_config_help[] = N_( + "\n" + "For various reasons, one may wish to keep different kernel\n" + "configurations available on a single machine.\n" + "\n" + "Entering a file name here will allow you to later retrieve, modify\n" + "and use the current configuration as an alternate to whatever\n" + "configuration options you have selected at that time.\n" + "\n" + "If you are uncertain what all this means then you should probably\n" + "leave this blank.\n"), +search_help[] = N_( + "\n" + "Search for CONFIG_ symbols and display their relations.\n" + "Regular expressions are allowed.\n" + "Example: search for \"^FOO\"\n" + "Result:\n" + "-----------------------------------------------------------------\n" + "Symbol: FOO [=m]\n" + "Prompt: Foo bus is used to drive the bar HW\n" + "Defined at drivers/pci/Kconfig:47\n" + "Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n" + "Location:\n" + " -> Bus options (PCI, PCMCIA, EISA, MCA, ISA)\n" + " -> PCI support (PCI [=y])\n" + " -> PCI access mode ( [=y])\n" + "Selects: LIBCRC32\n" + "Selected by: BAR\n" + "-----------------------------------------------------------------\n" + "o The line 'Prompt:' shows the text used in the menu structure for\n" + " this CONFIG_ symbol\n" + "o The 'Defined at' line tell at what file / line number the symbol\n" + " is defined\n" + "o The 'Depends on:' line tell what symbols needs to be defined for\n" + " this symbol to be visible in the menu (selectable)\n" + "o The 'Location:' lines tell where in the menu structure this symbol\n" + " is located\n" + " A location followed by a [=y] indicate that this is a selectable\n" + " menu item - and current value is displayed inside brackets.\n" + "o The 'Selects:' line tell what symbol will be automatically\n" + " selected if this symbol is selected (y or m)\n" + "o The 'Selected by' line tell what symbol has selected this symbol\n" + "\n" + "Only relevant lines are shown.\n" + "\n\n" + "Search examples:\n" + "Examples: USB => find all CONFIG_ symbols containing USB\n" + " ^USB => find all CONFIG_ symbols starting with USB\n" + " USB$ => find all CONFIG_ symbols ending with USB\n" + "\n"); + +static char buf[4096], *bufptr = buf; +static char input_buf[4096]; +static char filename[PATH_MAX+1] = ".config"; +static char *args[1024], **argptr = args; +static int indent; +static struct termios ios_org; +static int rows = 0, cols = 0; +static struct menu *current_menu; +static int child_count; +static int do_resize; +static int single_menu_mode; + +static void conf(struct menu *menu); +static void conf_choice(struct menu *menu); +static void conf_string(struct menu *menu); +static void conf_load(void); +static void conf_save(void); +static void show_textbox(const char *title, const char *text, int r, int c); +static void show_helptext(const char *title, const char *text); +static void show_help(struct menu *menu); +static void show_file(const char *filename, const char *title, int r, int c); + +static void cprint_init(void); +static int cprint1(const char *fmt, ...); +static void cprint_done(void); +static int cprint(const char *fmt, ...); + +static void init_wsize(void) +{ + struct winsize ws; + char *env; + + if (!ioctl(STDIN_FILENO, TIOCGWINSZ, &ws)) { + rows = ws.ws_row; + cols = ws.ws_col; + } + + if (!rows) { + env = getenv("LINES"); + if (env) + rows = atoi(env); + if (!rows) + rows = 24; + } + if (!cols) { + env = getenv("COLUMNS"); + if (env) + cols = atoi(env); + if (!cols) + cols = 80; + } + + if (rows < 19 || cols < 80) { + fprintf(stderr, N_("Your display is too small to run Menuconfig!\n")); + fprintf(stderr, N_("It must be at least 19 lines by 80 columns.\n")); + exit(1); + } + + rows -= 4; + cols -= 5; +} + +static void cprint_init(void) +{ + bufptr = buf; + argptr = args; + memset(args, 0, sizeof(args)); + indent = 0; + child_count = 0; + cprint("./scripts/lxdialog/lxdialog"); + cprint("--backtitle"); + cprint(menu_backtitle); +} + +static int cprint1(const char *fmt, ...) +{ + va_list ap; + int res; + + if (!*argptr) + *argptr = bufptr; + va_start(ap, fmt); + res = vsprintf(bufptr, fmt, ap); + va_end(ap); + bufptr += res; + + return res; +} + +static void cprint_done(void) +{ + *bufptr++ = 0; + argptr++; +} + +static int cprint(const char *fmt, ...) +{ + va_list ap; + int res; + + *argptr++ = bufptr; + va_start(ap, fmt); + res = vsprintf(bufptr, fmt, ap); + va_end(ap); + bufptr += res; + *bufptr++ = 0; + + return res; +} + +static void get_prompt_str(struct gstr *r, struct property *prop) +{ + int i, j; + struct menu *submenu[8], *menu; + + str_printf(r, "Prompt: %s\n", prop->text); + str_printf(r, " Defined at %s:%d\n", prop->menu->file->name, + prop->menu->lineno); + if (!expr_is_yes(prop->visible.expr)) { + str_append(r, " Depends on: "); + expr_gstr_print(prop->visible.expr, r); + str_append(r, "\n"); + } + menu = prop->menu->parent; + for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent) + submenu[i++] = menu; + if (i > 0) { + str_printf(r, " Location:\n"); + for (j = 4; --i >= 0; j += 2) { + menu = submenu[i]; + str_printf(r, "%*c-> %s", j, ' ', menu_get_prompt(menu)); + if (menu->sym) { + str_printf(r, " (%s [=%s])", menu->sym->name ? + menu->sym->name : "", + sym_get_string_value(menu->sym)); + } + str_append(r, "\n"); + } + } +} + +static void get_symbol_str(struct gstr *r, struct symbol *sym) +{ + bool hit; + struct property *prop; + + str_printf(r, "Symbol: %s [=%s]\n", sym->name, + sym_get_string_value(sym)); + for_all_prompts(sym, prop) + get_prompt_str(r, prop); + hit = false; + for_all_properties(sym, prop, P_SELECT) { + if (!hit) { + str_append(r, " Selects: "); + hit = true; + } else + str_printf(r, " && "); + expr_gstr_print(prop->expr, r); + } + if (hit) + str_append(r, "\n"); + if (sym->rev_dep.expr) { + str_append(r, " Selected by: "); + expr_gstr_print(sym->rev_dep.expr, r); + str_append(r, "\n"); + } + str_append(r, "\n\n"); +} + +static struct gstr get_relations_str(struct symbol **sym_arr) +{ + struct symbol *sym; + struct gstr res = str_new(); + int i; + + for (i = 0; sym_arr && (sym = sym_arr[i]); i++) + get_symbol_str(&res, sym); + if (!i) + str_append(&res, "No matches found.\n"); + return res; +} + +pid_t pid; + +static void winch_handler(int sig) +{ + if (!do_resize) { + kill(pid, SIGINT); + do_resize = 1; + } +} + +static int exec_conf(void) +{ + int pipefd[2], stat, size; + struct sigaction sa; + sigset_t sset, osset; + + sigemptyset(&sset); + sigaddset(&sset, SIGINT); + sigprocmask(SIG_BLOCK, &sset, &osset); + + signal(SIGINT, SIG_DFL); + + sa.sa_handler = winch_handler; + sigemptyset(&sa.sa_mask); + sa.sa_flags = SA_RESTART; + sigaction(SIGWINCH, &sa, NULL); + + *argptr++ = NULL; + + pipe(pipefd); + pid = fork(); + if (pid == 0) { + sigprocmask(SIG_SETMASK, &osset, NULL); + dup2(pipefd[1], 2); + close(pipefd[0]); + close(pipefd[1]); + execv(args[0], args); + _exit(EXIT_FAILURE); + } + + close(pipefd[1]); + bufptr = input_buf; + while (1) { + size = input_buf + sizeof(input_buf) - bufptr; + size = read(pipefd[0], bufptr, size); + if (size <= 0) { + if (size < 0) { + if (errno == EINTR || errno == EAGAIN) + continue; + perror("read"); + } + break; + } + bufptr += size; + } + *bufptr++ = 0; + close(pipefd[0]); + waitpid(pid, &stat, 0); + + if (do_resize) { + init_wsize(); + do_resize = 0; + sigprocmask(SIG_SETMASK, &osset, NULL); + return -1; + } + if (WIFSIGNALED(stat)) { + printf("\finterrupted(%d)\n", WTERMSIG(stat)); + exit(1); + } +#if 0 + printf("\fexit state: %d\nexit data: '%s'\n", WEXITSTATUS(stat), input_buf); + sleep(1); +#endif + sigpending(&sset); + if (sigismember(&sset, SIGINT)) { + printf("\finterrupted\n"); + exit(1); + } + sigprocmask(SIG_SETMASK, &osset, NULL); + + return WEXITSTATUS(stat); +} + +static void search_conf(void) +{ + struct symbol **sym_arr; + int stat; + struct gstr res; + +again: + cprint_init(); + cprint("--title"); + cprint(_("Search Configuration Parameter")); + cprint("--inputbox"); + cprint(_("Enter CONFIG_ (sub)string to search for (omit CONFIG_)")); + cprint("10"); + cprint("75"); + cprint(""); + stat = exec_conf(); + if (stat < 0) + goto again; + switch (stat) { + case 0: + break; + case 1: + show_helptext(_("Search Configuration"), search_help); + goto again; + default: + return; + } + + sym_arr = sym_re_search(input_buf); + res = get_relations_str(sym_arr); + free(sym_arr); + show_textbox(_("Search Results"), str_get(&res), 0, 0); + str_free(&res); +} + +static void build_conf(struct menu *menu) +{ + struct symbol *sym; + struct property *prop; + struct menu *child; + int type, tmp, doint = 2; + tristate val; + char ch; + + if (!menu_is_visible(menu)) + return; + + sym = menu->sym; + prop = menu->prompt; + if (!sym) { + if (prop && menu != current_menu) { + const char *prompt = menu_get_prompt(menu); + switch (prop->type) { + case P_MENU: + child_count++; + cprint("m%p", menu); + + if (single_menu_mode) { + cprint1("%s%*c%s", + menu->data ? "-->" : "++>", + indent + 1, ' ', prompt); + } else + cprint1(" %*c%s --->", indent + 1, ' ', prompt); + + cprint_done(); + if (single_menu_mode && menu->data) + goto conf_childs; + return; + default: + if (prompt) { + child_count++; + cprint(":%p", menu); + cprint("---%*c%s", indent + 1, ' ', prompt); + } + } + } else + doint = 0; + goto conf_childs; + } + + type = sym_get_type(sym); + if (sym_is_choice(sym)) { + struct symbol *def_sym = sym_get_choice_value(sym); + struct menu *def_menu = NULL; + + child_count++; + for (child = menu->list; child; child = child->next) { + if (menu_is_visible(child) && child->sym == def_sym) + def_menu = child; + } + + val = sym_get_tristate_value(sym); + if (sym_is_changable(sym)) { + cprint("t%p", menu); + switch (type) { + case S_BOOLEAN: + cprint1("[%c]", val == no ? ' ' : '*'); + break; + case S_TRISTATE: + switch (val) { + case yes: ch = '*'; break; + case mod: ch = 'M'; break; + default: ch = ' '; break; + } + cprint1("<%c>", ch); + break; + } + } else { + cprint("%c%p", def_menu ? 't' : ':', menu); + cprint1(" "); + } + + cprint1("%*c%s", indent + 1, ' ', menu_get_prompt(menu)); + if (val == yes) { + if (def_menu) { + cprint1(" (%s)", menu_get_prompt(def_menu)); + cprint1(" --->"); + cprint_done(); + if (def_menu->list) { + indent += 2; + build_conf(def_menu); + indent -= 2; + } + } else + cprint_done(); + return; + } + cprint_done(); + } else { + if (menu == current_menu) { + cprint(":%p", menu); + cprint("---%*c%s", indent + 1, ' ', menu_get_prompt(menu)); + goto conf_childs; + } + child_count++; + val = sym_get_tristate_value(sym); + if (sym_is_choice_value(sym) && val == yes) { + cprint(":%p", menu); + cprint1(" "); + } else { + switch (type) { + case S_BOOLEAN: + cprint("t%p", menu); + if (sym_is_changable(sym)) + cprint1("[%c]", val == no ? ' ' : '*'); + else + cprint1("---"); + break; + case S_TRISTATE: + cprint("t%p", menu); + switch (val) { + case yes: ch = '*'; break; + case mod: ch = 'M'; break; + default: ch = ' '; break; + } + if (sym_is_changable(sym)) + cprint1("<%c>", ch); + else + cprint1("---"); + break; + default: + cprint("s%p", menu); + tmp = cprint1("(%s)", sym_get_string_value(sym)); + tmp = indent - tmp + 4; + if (tmp < 0) + tmp = 0; + cprint1("%*c%s%s", tmp, ' ', menu_get_prompt(menu), + (sym_has_value(sym) || !sym_is_changable(sym)) ? + "" : " (NEW)"); + cprint_done(); + goto conf_childs; + } + } + cprint1("%*c%s%s", indent + 1, ' ', menu_get_prompt(menu), + (sym_has_value(sym) || !sym_is_changable(sym)) ? + "" : " (NEW)"); + if (menu->prompt->type == P_MENU) { + cprint1(" --->"); + cprint_done(); + return; + } + cprint_done(); + } + +conf_childs: + indent += doint; + for (child = menu->list; child; child = child->next) + build_conf(child); + indent -= doint; +} + +static void conf(struct menu *menu) +{ + struct menu *submenu; + const char *prompt = menu_get_prompt(menu); + struct symbol *sym; + char active_entry[40]; + int stat, type, i; + + unlink("lxdialog.scrltmp"); + active_entry[0] = 0; + while (1) { + cprint_init(); + cprint("--title"); + cprint("%s", prompt ? prompt : _("Main Menu")); + cprint("--menu"); + cprint(_(menu_instructions)); + cprint("%d", rows); + cprint("%d", cols); + cprint("%d", rows - 10); + cprint("%s", active_entry); + current_menu = menu; + build_conf(menu); + if (!child_count) + break; + if (menu == &rootmenu) { + cprint(":"); + cprint("--- "); + cprint("L"); + cprint(_(" Load an Alternate Configuration File")); + cprint("S"); + cprint(_(" Save Configuration to an Alternate File")); + } + stat = exec_conf(); + if (stat < 0) + continue; + + if (stat == 1 || stat == 255) + break; + + type = input_buf[0]; + if (!type) + continue; + + for (i = 0; input_buf[i] && !isspace(input_buf[i]); i++) + ; + if (i >= sizeof(active_entry)) + i = sizeof(active_entry) - 1; + input_buf[i] = 0; + strcpy(active_entry, input_buf); + + sym = NULL; + submenu = NULL; + if (sscanf(input_buf + 1, "%p", &submenu) == 1) + sym = submenu->sym; + + switch (stat) { + case 0: + switch (type) { + case 'm': + if (single_menu_mode) + submenu->data = (void *) (long) !submenu->data; + else + conf(submenu); + break; + case 't': + if (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes) + conf_choice(submenu); + else if (submenu->prompt->type == P_MENU) + conf(submenu); + break; + case 's': + conf_string(submenu); + break; + case 'L': + conf_load(); + break; + case 'S': + conf_save(); + break; + } + break; + case 2: + if (sym) + show_help(submenu); + else + show_helptext("README", _(mconf_readme)); + break; + case 3: + if (type == 't') { + if (sym_set_tristate_value(sym, yes)) + break; + if (sym_set_tristate_value(sym, mod)) + show_textbox(NULL, setmod_text, 6, 74); + } + break; + case 4: + if (type == 't') + sym_set_tristate_value(sym, no); + break; + case 5: + if (type == 't') + sym_set_tristate_value(sym, mod); + break; + case 6: + if (type == 't') + sym_toggle_tristate_value(sym); + else if (type == 'm') + conf(submenu); + break; + case 7: + search_conf(); + break; + } + } +} + +static void show_textbox(const char *title, const char *text, int r, int c) +{ + int fd; + + fd = creat(".help.tmp", 0777); + write(fd, text, strlen(text)); + close(fd); + show_file(".help.tmp", title, r, c); + unlink(".help.tmp"); +} + +static void show_helptext(const char *title, const char *text) +{ + show_textbox(title, text, 0, 0); +} + +static void show_help(struct menu *menu) +{ + struct gstr help = str_new(); + struct symbol *sym = menu->sym; + + if (sym->help) + { + if (sym->name) { + str_printf(&help, "CONFIG_%s:\n\n", sym->name); + str_append(&help, _(sym->help)); + str_append(&help, "\n"); + } + } else { + str_append(&help, nohelp_text); + } + get_symbol_str(&help, sym); + show_helptext(menu_get_prompt(menu), str_get(&help)); + str_free(&help); +} + +static void show_file(const char *filename, const char *title, int r, int c) +{ + do { + cprint_init(); + if (title) { + cprint("--title"); + cprint("%s", title); + } + cprint("--textbox"); + cprint("%s", filename); + cprint("%d", r ? r : rows); + cprint("%d", c ? c : cols); + } while (exec_conf() < 0); +} + +static void conf_choice(struct menu *menu) +{ + const char *prompt = menu_get_prompt(menu); + struct menu *child; + struct symbol *active; + int stat; + + active = sym_get_choice_value(menu->sym); + while (1) { + cprint_init(); + cprint("--title"); + cprint("%s", prompt ? prompt : _("Main Menu")); + cprint("--radiolist"); + cprint(_(radiolist_instructions)); + cprint("15"); + cprint("70"); + cprint("6"); + + current_menu = menu; + for (child = menu->list; child; child = child->next) { + if (!menu_is_visible(child)) + continue; + cprint("%p", child); + cprint("%s", menu_get_prompt(child)); + if (child->sym == sym_get_choice_value(menu->sym)) + cprint("ON"); + else if (child->sym == active) + cprint("SELECTED"); + else + cprint("OFF"); + } + + stat = exec_conf(); + switch (stat) { + case 0: + if (sscanf(input_buf, "%p", &child) != 1) + break; + sym_set_tristate_value(child->sym, yes); + return; + case 1: + if (sscanf(input_buf, "%p", &child) == 1) { + show_help(child); + active = child->sym; + } else + show_help(menu); + break; + case 255: + return; + } + } +} + +static void conf_string(struct menu *menu) +{ + const char *prompt = menu_get_prompt(menu); + int stat; + + while (1) { + cprint_init(); + cprint("--title"); + cprint("%s", prompt ? prompt : _("Main Menu")); + cprint("--inputbox"); + switch (sym_get_type(menu->sym)) { + case S_INT: + cprint(_(inputbox_instructions_int)); + break; + case S_HEX: + cprint(_(inputbox_instructions_hex)); + break; + case S_STRING: + cprint(_(inputbox_instructions_string)); + break; + default: + /* panic? */; + } + cprint("10"); + cprint("75"); + cprint("%s", sym_get_string_value(menu->sym)); + stat = exec_conf(); + switch (stat) { + case 0: + if (sym_set_string_value(menu->sym, input_buf)) + return; + show_textbox(NULL, _("You have made an invalid entry."), 5, 43); + break; + case 1: + show_help(menu); + break; + case 255: + return; + } + } +} + +static void conf_load(void) +{ + int stat; + + while (1) { + cprint_init(); + cprint("--inputbox"); + cprint(load_config_text); + cprint("11"); + cprint("55"); + cprint("%s", filename); + stat = exec_conf(); + switch(stat) { + case 0: + if (!input_buf[0]) + return; + if (!conf_read(input_buf)) + return; + show_textbox(NULL, _("File does not exist!"), 5, 38); + break; + case 1: + show_helptext(_("Load Alternate Configuration"), load_config_help); + break; + case 255: + return; + } + } +} + +static void conf_save(void) +{ + int stat; + + while (1) { + cprint_init(); + cprint("--inputbox"); + cprint(save_config_text); + cprint("11"); + cprint("55"); + cprint("%s", filename); + stat = exec_conf(); + switch(stat) { + case 0: + if (!input_buf[0]) + return; + if (!conf_write(input_buf)) + return; + show_textbox(NULL, _("Can't create file! Probably a nonexistent directory."), 5, 60); + break; + case 1: + show_helptext(_("Save Alternate Configuration"), save_config_help); + break; + case 255: + return; + } + } +} + +static void conf_cleanup(void) +{ + tcsetattr(1, TCSAFLUSH, &ios_org); + unlink(".help.tmp"); + unlink("lxdialog.scrltmp"); +} + +int main(int ac, char **av) +{ + struct symbol *sym; + char *mode; + int stat; + + setlocale(LC_ALL, ""); + bindtextdomain(PACKAGE, LOCALEDIR); + textdomain(PACKAGE); + + conf_parse(av[1]); + conf_read(NULL); + + sym = sym_lookup("KERNELRELEASE", 0); + sym_calc_value(sym); + sprintf(menu_backtitle, _("Linux Kernel v%s Configuration"), + sym_get_string_value(sym)); + + mode = getenv("MENUCONFIG_MODE"); + if (mode) { + if (!strcasecmp(mode, "single_menu")) + single_menu_mode = 1; + } + + tcgetattr(1, &ios_org); + atexit(conf_cleanup); + init_wsize(); + conf(&rootmenu); + + do { + cprint_init(); + cprint("--yesno"); + cprint(_("Do you wish to save your new kernel configuration?")); + cprint("5"); + cprint("60"); + stat = exec_conf(); + } while (stat < 0); + + if (stat == 0) { + if (conf_write(NULL)) { + fprintf(stderr, _("\n\n" + "Error during writing of the kernel configuration.\n" + "Your kernel configuration changes were NOT saved." + "\n\n")); + return 1; + } + printf(_("\n\n" + "*** End of Linux kernel configuration.\n" + "*** Execute 'make' to build the kernel or try 'make help'." + "\n\n")); + } else { + fprintf(stderr, _("\n\n" + "Your kernel configuration changes were NOT saved." + "\n\n")); + } + + return 0; +} diff -urN oldtree/scripts/kconfig/qconf.cc newtree/scripts/kconfig/qconf.cc --- oldtree/scripts/kconfig/qconf.cc 2006-01-28 19:08:42.000000000 +0000 +++ newtree/scripts/kconfig/qconf.cc 2006-01-29 11:07:40.217510056 +0000 @@ -1128,14 +1128,14 @@ if (s.isNull()) return; if (conf_read(QFile::encodeName(s))) - QMessageBox::information(this, "qconf", "Unable to load configuration!"); + QMessageBox::information(this, "QConf Error", "Unable to load configuration!"); ConfigView::updateListAll(); } void ConfigMainWindow::saveConfig(void) { if (conf_write(NULL)) - QMessageBox::information(this, "qconf", "Unable to save configuration!"); + QMessageBox::information(this, "QConf Error", "Unable to save configuration!"); } void ConfigMainWindow::saveConfigAs(void) @@ -1144,7 +1144,7 @@ if (s.isNull()) return; if (conf_write(QFile::encodeName(s))) - QMessageBox::information(this, "qconf", "Unable to save configuration!"); + QMessageBox::information(this, "QConf Error", "Unable to save configuration!"); } void ConfigMainWindow::changeMenu(struct menu *menu) @@ -1280,7 +1280,7 @@ e->accept(); return; } - QMessageBox mb("qconf", "Save configuration?", QMessageBox::Warning, + QMessageBox mb("Save .config?", "Save configuration?", QMessageBox::Warning, QMessageBox::Yes | QMessageBox::Default, QMessageBox::No, QMessageBox::Cancel | QMessageBox::Escape); mb.setButtonText(QMessageBox::Yes, "&Save Changes"); mb.setButtonText(QMessageBox::No, "&Discard Changes"); @@ -1299,7 +1299,8 @@ void ConfigMainWindow::showIntro(void) { - static char str[] = "Welcome to the qconf graphical kernel configuration tool for Linux.\n\n" + static char str[1000]; + sprintf(str, "Welcome to the qconf graphical kernel configuration tool for Linux %s \"%s\".\n\n" "For each option, a blank box indicates the feature is disabled, a check\n" "indicates it is enabled, and a dot indicates that it is to be compiled\n" "as a module. Clicking on the box will cycle through the three states.\n\n" @@ -1309,9 +1310,10 @@ "options must be enabled to support the option you are interested in, you can\n" "still view the help of a grayed-out option.\n\n" "Toggling Show Debug Info under the Options menu will show the dependencies,\n" - "which you can then match by examining other options.\n\n"; + "which you can then match by examining other options.\n\n", + getenv("KERNELRELEASE"), getenv("NAME")); - QMessageBox::information(this, "qconf", str); + QMessageBox::information(this, "Introduction", str); } void ConfigMainWindow::showAbout(void) @@ -1319,7 +1321,7 @@ static char str[] = "qconf is Copyright (C) 2002 Roman Zippel .\n\n" "Bug reports and feature request can also be entered at http://bugzilla.kernel.org/\n"; - QMessageBox::information(this, "qconf", str); + QMessageBox::information(this, "About", str); } void ConfigMainWindow::saveSettings(void) @@ -1387,7 +1389,12 @@ { ConfigMainWindow* v; const char *name; - + static char title[100]; + + sprintf(title,"Linux Kernel %s \"%s\" Configuration", + getenv("KERNELRELEASE"), getenv("NAME") + ); + bindtextdomain(PACKAGE, LOCALEDIR); textdomain(PACKAGE); @@ -1416,6 +1423,7 @@ v = new ConfigMainWindow(); + v->setCaption(title); //zconfdump(stdout); v->show(); configApp->connect(configApp, SIGNAL(lastWindowClosed()), SLOT(quit())); diff -urN oldtree/scripts/kconfig/zconf.tab.c_shipped newtree/scripts/kconfig/zconf.tab.c_shipped --- oldtree/scripts/kconfig/zconf.tab.c_shipped 2006-01-28 19:08:42.000000000 +0000 +++ newtree/scripts/kconfig/zconf.tab.c_shipped 2006-01-29 11:07:40.219509752 +0000 @@ -1943,13 +1943,14 @@ { struct symbol *sym; int i; - + static char title[100]; zconf_initscan(name); - + sprintf(title,"Linux Kernel %s \"%s\" Configuration", + getenv("KERNELRELEASE"), getenv("NAME")); sym_init(); menu_init(); modules_sym = sym_lookup("MODULES", 0); - rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL); + rootmenu.prompt = menu_add_prompt(P_MENU, title, NULL); #if YYDEBUG if (getenv("ZCONF_DEBUG")) diff -urN oldtree/scripts/kconfig/zconf.tab.c_shipped.orig newtree/scripts/kconfig/zconf.tab.c_shipped.orig --- oldtree/scripts/kconfig/zconf.tab.c_shipped.orig 1970-01-01 00:00:00.000000000 +0000 +++ newtree/scripts/kconfig/zconf.tab.c_shipped.orig 2006-01-28 19:08:42.000000000 +0000 @@ -0,0 +1,2173 @@ +/* A Bison parser, made by GNU Bison 2.0. */ + +/* Skeleton parser for Yacc-like parsing with Bison, + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +/* As a special exception, when this file is copied by Bison into a + Bison output file, you may use that output file without restriction. + This special exception was added by the Free Software Foundation + in version 1.24 of Bison. */ + +/* Written by Richard Stallman by simplifying the original so called + ``semantic'' parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 0 + +/* Substitute the variable and function names. */ +#define yyparse zconfparse +#define yylex zconflex +#define yyerror zconferror +#define yylval zconflval +#define yychar zconfchar +#define yydebug zconfdebug +#define yynerrs zconfnerrs + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + T_MAINMENU = 258, + T_MENU = 259, + T_ENDMENU = 260, + T_SOURCE = 261, + T_CHOICE = 262, + T_ENDCHOICE = 263, + T_COMMENT = 264, + T_CONFIG = 265, + T_MENUCONFIG = 266, + T_HELP = 267, + T_HELPTEXT = 268, + T_IF = 269, + T_ENDIF = 270, + T_DEPENDS = 271, + T_REQUIRES = 272, + T_OPTIONAL = 273, + T_PROMPT = 274, + T_TYPE = 275, + T_DEFAULT = 276, + T_SELECT = 277, + T_RANGE = 278, + T_ON = 279, + T_WORD = 280, + T_WORD_QUOTE = 281, + T_UNEQUAL = 282, + T_CLOSE_PAREN = 283, + T_OPEN_PAREN = 284, + T_EOL = 285, + T_OR = 286, + T_AND = 287, + T_EQUAL = 288, + T_NOT = 289 + }; +#endif +#define T_MAINMENU 258 +#define T_MENU 259 +#define T_ENDMENU 260 +#define T_SOURCE 261 +#define T_CHOICE 262 +#define T_ENDCHOICE 263 +#define T_COMMENT 264 +#define T_CONFIG 265 +#define T_MENUCONFIG 266 +#define T_HELP 267 +#define T_HELPTEXT 268 +#define T_IF 269 +#define T_ENDIF 270 +#define T_DEPENDS 271 +#define T_REQUIRES 272 +#define T_OPTIONAL 273 +#define T_PROMPT 274 +#define T_TYPE 275 +#define T_DEFAULT 276 +#define T_SELECT 277 +#define T_RANGE 278 +#define T_ON 279 +#define T_WORD 280 +#define T_WORD_QUOTE 281 +#define T_UNEQUAL 282 +#define T_CLOSE_PAREN 283 +#define T_OPEN_PAREN 284 +#define T_EOL 285 +#define T_OR 286 +#define T_AND 287 +#define T_EQUAL 288 +#define T_NOT 289 + + + + +/* Copy the first part of user declarations. */ + + +/* + * Copyright (C) 2002 Roman Zippel + * Released under the terms of the GNU GPL v2.0. + */ + +#include +#include +#include +#include +#include +#include + +#define LKC_DIRECT_LINK +#include "lkc.h" + +#include "zconf.hash.c" + +#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) + +#define PRINTD 0x0001 +#define DEBUG_PARSE 0x0002 + +int cdebug = PRINTD; + +extern int zconflex(void); +static void zconfprint(const char *err, ...); +static void zconf_error(const char *err, ...); +static void zconferror(const char *err); +static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken); + +struct symbol *symbol_hash[257]; + +static struct menu *current_menu, *current_entry; + +#define YYDEBUG 0 +#if YYDEBUG +#define YYERROR_VERBOSE +#endif + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED) + +typedef union YYSTYPE { + char *string; + struct file *file; + struct symbol *symbol; + struct expr *expr; + struct menu *menu; + struct kconf_id *id; +} YYSTYPE; +/* Line 190 of yacc.c. */ + +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + + + +/* Copy the second part of user declarations. */ + + +/* Line 213 of yacc.c. */ + + +#if ! defined (yyoverflow) || YYERROR_VERBOSE + +# ifndef YYFREE +# define YYFREE free +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# endif + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# else +# define YYSTACK_ALLOC alloca +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0) +# else +# if defined (__STDC__) || defined (__cplusplus) +# include /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# endif +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# endif +#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */ + + +#if (! defined (yyoverflow) \ + && (! defined (__cplusplus) \ + || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + short int yyss; + YYSTYPE yyvs; + }; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (short int) + sizeof (YYSTYPE)) \ + + YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined (__GNUC__) && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + register YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (0) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (0) + +#endif + +#if defined (__STDC__) || defined (__cplusplus) + typedef signed char yysigned_char; +#else + typedef short int yysigned_char; +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 3 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 264 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 35 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 42 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 104 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 175 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 289 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const unsigned char yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const unsigned short int yyprhs[] = +{ + 0, 0, 3, 5, 6, 9, 12, 15, 20, 23, + 28, 33, 37, 39, 41, 43, 45, 47, 49, 51, + 53, 55, 57, 59, 61, 63, 67, 70, 74, 77, + 81, 84, 85, 88, 91, 94, 97, 100, 104, 109, + 114, 119, 125, 128, 131, 133, 137, 138, 141, 144, + 147, 150, 153, 158, 162, 165, 170, 171, 174, 178, + 180, 184, 185, 188, 191, 194, 198, 201, 203, 207, + 208, 211, 214, 217, 221, 225, 228, 231, 234, 235, + 238, 241, 244, 249, 253, 257, 258, 261, 263, 265, + 268, 271, 274, 276, 279, 280, 283, 285, 289, 293, + 297, 300, 304, 308, 310 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yysigned_char yyrhs[] = +{ + 36, 0, -1, 37, -1, -1, 37, 39, -1, 37, + 50, -1, 37, 61, -1, 37, 3, 71, 73, -1, + 37, 72, -1, 37, 25, 1, 30, -1, 37, 38, + 1, 30, -1, 37, 1, 30, -1, 16, -1, 19, + -1, 20, -1, 22, -1, 18, -1, 23, -1, 21, + -1, 30, -1, 56, -1, 65, -1, 42, -1, 44, + -1, 63, -1, 25, 1, 30, -1, 1, 30, -1, + 10, 25, 30, -1, 41, 45, -1, 11, 25, 30, + -1, 43, 45, -1, -1, 45, 46, -1, 45, 69, + -1, 45, 67, -1, 45, 40, -1, 45, 30, -1, + 20, 70, 30, -1, 19, 71, 74, 30, -1, 21, + 75, 74, 30, -1, 22, 25, 74, 30, -1, 23, + 76, 76, 74, 30, -1, 7, 30, -1, 47, 51, + -1, 72, -1, 48, 53, 49, -1, -1, 51, 52, + -1, 51, 69, -1, 51, 67, -1, 51, 30, -1, + 51, 40, -1, 19, 71, 74, 30, -1, 20, 70, + 30, -1, 18, 30, -1, 21, 25, 74, 30, -1, + -1, 53, 39, -1, 14, 75, 73, -1, 72, -1, + 54, 57, 55, -1, -1, 57, 39, -1, 57, 61, + -1, 57, 50, -1, 4, 71, 30, -1, 58, 68, + -1, 72, -1, 59, 62, 60, -1, -1, 62, 39, + -1, 62, 61, -1, 62, 50, -1, 6, 71, 30, + -1, 9, 71, 30, -1, 64, 68, -1, 12, 30, + -1, 66, 13, -1, -1, 68, 69, -1, 68, 30, + -1, 68, 40, -1, 16, 24, 75, 30, -1, 16, + 75, 30, -1, 17, 75, 30, -1, -1, 71, 74, + -1, 25, -1, 26, -1, 5, 30, -1, 8, 30, + -1, 15, 30, -1, 30, -1, 73, 30, -1, -1, + 14, 75, -1, 76, -1, 76, 33, 76, -1, 76, + 27, 76, -1, 29, 75, 28, -1, 34, 75, -1, + 75, 31, 75, -1, 75, 32, 75, -1, 25, -1, + 26, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const unsigned short int yyrline[] = +{ + 0, 103, 103, 105, 107, 108, 109, 110, 111, 112, + 113, 117, 121, 121, 121, 121, 121, 121, 121, 125, + 126, 127, 128, 129, 130, 134, 135, 141, 149, 155, + 163, 173, 175, 176, 177, 178, 179, 182, 190, 196, + 206, 212, 220, 229, 234, 242, 245, 247, 248, 249, + 250, 251, 254, 260, 271, 277, 287, 289, 294, 302, + 310, 313, 315, 316, 317, 322, 329, 334, 342, 345, + 347, 348, 349, 352, 360, 367, 374, 380, 387, 389, + 390, 391, 394, 399, 404, 412, 414, 419, 420, 423, + 424, 425, 429, 430, 433, 434, 437, 438, 439, 440, + 441, 442, 443, 446, 447 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE +/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "T_MAINMENU", "T_MENU", "T_ENDMENU", + "T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG", + "T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS", + "T_REQUIRES", "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", + "T_SELECT", "T_RANGE", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL", + "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL", + "T_NOT", "$accept", "input", "stmt_list", "option_name", "common_stmt", + "option_error", "config_entry_start", "config_stmt", + "menuconfig_entry_start", "menuconfig_stmt", "config_option_list", + "config_option", "choice", "choice_entry", "choice_end", "choice_stmt", + "choice_option_list", "choice_option", "choice_block", "if_entry", + "if_end", "if_stmt", "if_block", "menu", "menu_entry", "menu_end", + "menu_stmt", "menu_block", "source_stmt", "comment", "comment_stmt", + "help_start", "help", "depends_list", "depends", "prompt_stmt_opt", + "prompt", "end", "nl", "if_expr", "expr", "symbol", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const unsigned short int yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, + 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, + 285, 286, 287, 288, 289 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const unsigned char yyr1[] = +{ + 0, 35, 36, 37, 37, 37, 37, 37, 37, 37, + 37, 37, 38, 38, 38, 38, 38, 38, 38, 39, + 39, 39, 39, 39, 39, 40, 40, 41, 42, 43, + 44, 45, 45, 45, 45, 45, 45, 46, 46, 46, + 46, 46, 47, 48, 49, 50, 51, 51, 51, 51, + 51, 51, 52, 52, 52, 52, 53, 53, 54, 55, + 56, 57, 57, 57, 57, 58, 59, 60, 61, 62, + 62, 62, 62, 63, 64, 65, 66, 67, 68, 68, + 68, 68, 69, 69, 69, 70, 70, 71, 71, 72, + 72, 72, 73, 73, 74, 74, 75, 75, 75, 75, + 75, 75, 75, 76, 76 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const unsigned char yyr2[] = +{ + 0, 2, 1, 0, 2, 2, 2, 4, 2, 4, + 4, 3, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 3, 2, 3, 2, 3, + 2, 0, 2, 2, 2, 2, 2, 3, 4, 4, + 4, 5, 2, 2, 1, 3, 0, 2, 2, 2, + 2, 2, 4, 3, 2, 4, 0, 2, 3, 1, + 3, 0, 2, 2, 2, 3, 2, 1, 3, 0, + 2, 2, 2, 3, 3, 2, 2, 2, 0, 2, + 2, 2, 4, 3, 3, 0, 2, 1, 1, 2, + 2, 2, 1, 2, 0, 2, 1, 3, 3, 3, + 2, 3, 3, 1, 1 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const unsigned char yydefact[] = +{ + 3, 0, 0, 1, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 12, 16, 13, 14, + 18, 15, 17, 0, 19, 0, 4, 31, 22, 31, + 23, 46, 56, 5, 61, 20, 78, 69, 6, 24, + 78, 21, 8, 11, 87, 88, 0, 0, 89, 0, + 42, 90, 0, 0, 0, 103, 104, 0, 0, 0, + 96, 91, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 92, 7, 65, 73, 74, 27, 29, 0, + 100, 0, 0, 58, 0, 0, 9, 10, 0, 0, + 0, 0, 0, 85, 0, 0, 0, 0, 36, 35, + 32, 0, 34, 33, 0, 0, 85, 0, 50, 51, + 47, 49, 48, 57, 45, 44, 62, 64, 60, 63, + 59, 80, 81, 79, 70, 72, 68, 71, 67, 93, + 99, 101, 102, 98, 97, 26, 76, 0, 0, 0, + 94, 0, 94, 94, 94, 0, 0, 77, 54, 94, + 0, 94, 0, 83, 84, 0, 0, 37, 86, 0, + 0, 94, 25, 0, 53, 0, 82, 95, 38, 39, + 40, 0, 52, 55, 41 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const short int yydefgoto[] = +{ + -1, 1, 2, 25, 26, 99, 27, 28, 29, 30, + 64, 100, 31, 32, 114, 33, 66, 110, 67, 34, + 118, 35, 68, 36, 37, 126, 38, 70, 39, 40, + 41, 101, 102, 69, 103, 141, 142, 42, 73, 156, + 59, 60 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -78 +static const short int yypact[] = +{ + -78, 2, 159, -78, -21, 0, 0, -12, 0, 1, + 4, 0, 27, 38, 60, 58, -78, -78, -78, -78, + -78, -78, -78, 100, -78, 104, -78, -78, -78, -78, + -78, -78, -78, -78, -78, -78, -78, -78, -78, -78, + -78, -78, -78, -78, -78, -78, 86, 113, -78, 114, + -78, -78, 125, 127, 128, -78, -78, 60, 60, 210, + 65, -78, 141, 142, 39, 103, 182, 200, 6, 66, + 6, 131, -78, 146, -78, -78, -78, -78, -78, 196, + -78, 60, 60, 146, 40, 40, -78, -78, 155, 156, + -2, 60, 0, 0, 60, 105, 40, 194, -78, -78, + -78, 206, -78, -78, 183, 0, 0, 195, -78, -78, + -78, -78, -78, -78, -78, -78, -78, -78, -78, -78, + -78, -78, -78, -78, -78, -78, -78, -78, -78, -78, + -78, 197, -78, -78, -78, -78, -78, 60, 213, 216, + 212, 203, 212, 190, 212, 40, 208, -78, -78, 212, + 222, 212, 219, -78, -78, 60, 223, -78, -78, 224, + 225, 212, -78, 226, -78, 227, -78, 47, -78, -78, + -78, 228, -78, -78, -78 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const short int yypgoto[] = +{ + -78, -78, -78, -78, 164, -36, -78, -78, -78, -78, + 230, -78, -78, -78, -78, 29, -78, -78, -78, -78, + -78, -78, -78, -78, -78, -78, 59, -78, -78, -78, + -78, -78, 198, 220, 24, 157, -5, 169, 202, 74, + -53, -77 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -76 +static const short int yytable[] = +{ + 46, 47, 3, 49, 79, 80, 52, 133, 134, 43, + 6, 7, 8, 9, 10, 11, 12, 13, 48, 145, + 14, 15, 137, 55, 56, 44, 45, 57, 131, 132, + 109, 50, 58, 122, 51, 122, 24, 138, 139, -28, + 88, 143, -28, -28, -28, -28, -28, -28, -28, -28, + -28, 89, 53, -28, -28, 90, 91, -28, 92, 93, + 94, 95, 96, 54, 97, 55, 56, 88, 161, 98, + -66, -66, -66, -66, -66, -66, -66, -66, 81, 82, + -66, -66, 90, 91, 152, 55, 56, 140, 61, 57, + 112, 97, 84, 123, 58, 123, 121, 117, 85, 125, + 149, 62, 167, -30, 88, 63, -30, -30, -30, -30, + -30, -30, -30, -30, -30, 89, 72, -30, -30, 90, + 91, -30, 92, 93, 94, 95, 96, 119, 97, 127, + 144, -75, 88, 98, -75, -75, -75, -75, -75, -75, + -75, -75, -75, 74, 75, -75, -75, 90, 91, -75, + -75, -75, -75, -75, -75, 76, 97, 77, 78, -2, + 4, 121, 5, 6, 7, 8, 9, 10, 11, 12, + 13, 86, 87, 14, 15, 16, 129, 17, 18, 19, + 20, 21, 22, 88, 23, 135, 136, -43, -43, 24, + -43, -43, -43, -43, 89, 146, -43, -43, 90, 91, + 104, 105, 106, 107, 155, 7, 8, 97, 10, 11, + 12, 13, 108, 148, 14, 15, 158, 159, 160, 147, + 151, 81, 82, 163, 130, 165, 155, 81, 82, 82, + 24, 113, 116, 157, 124, 171, 115, 120, 162, 128, + 72, 81, 82, 153, 81, 82, 154, 81, 82, 166, + 81, 82, 164, 168, 169, 170, 172, 173, 174, 65, + 71, 83, 0, 150, 111 +}; + +static const short int yycheck[] = +{ + 5, 6, 0, 8, 57, 58, 11, 84, 85, 30, + 4, 5, 6, 7, 8, 9, 10, 11, 30, 96, + 14, 15, 24, 25, 26, 25, 26, 29, 81, 82, + 66, 30, 34, 69, 30, 71, 30, 90, 91, 0, + 1, 94, 3, 4, 5, 6, 7, 8, 9, 10, + 11, 12, 25, 14, 15, 16, 17, 18, 19, 20, + 21, 22, 23, 25, 25, 25, 26, 1, 145, 30, + 4, 5, 6, 7, 8, 9, 10, 11, 31, 32, + 14, 15, 16, 17, 137, 25, 26, 92, 30, 29, + 66, 25, 27, 69, 34, 71, 30, 68, 33, 70, + 105, 1, 155, 0, 1, 1, 3, 4, 5, 6, + 7, 8, 9, 10, 11, 12, 30, 14, 15, 16, + 17, 18, 19, 20, 21, 22, 23, 68, 25, 70, + 25, 0, 1, 30, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 30, 30, 14, 15, 16, 17, 18, + 19, 20, 21, 22, 23, 30, 25, 30, 30, 0, + 1, 30, 3, 4, 5, 6, 7, 8, 9, 10, + 11, 30, 30, 14, 15, 16, 30, 18, 19, 20, + 21, 22, 23, 1, 25, 30, 30, 5, 6, 30, + 8, 9, 10, 11, 12, 1, 14, 15, 16, 17, + 18, 19, 20, 21, 14, 5, 6, 25, 8, 9, + 10, 11, 30, 30, 14, 15, 142, 143, 144, 13, + 25, 31, 32, 149, 28, 151, 14, 31, 32, 32, + 30, 67, 68, 30, 70, 161, 67, 68, 30, 70, + 30, 31, 32, 30, 31, 32, 30, 31, 32, 30, + 31, 32, 30, 30, 30, 30, 30, 30, 30, 29, + 40, 59, -1, 106, 66 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const unsigned char yystos[] = +{ + 0, 36, 37, 0, 1, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 14, 15, 16, 18, 19, 20, + 21, 22, 23, 25, 30, 38, 39, 41, 42, 43, + 44, 47, 48, 50, 54, 56, 58, 59, 61, 63, + 64, 65, 72, 30, 25, 26, 71, 71, 30, 71, + 30, 30, 71, 25, 25, 25, 26, 29, 34, 75, + 76, 30, 1, 1, 45, 45, 51, 53, 57, 68, + 62, 68, 30, 73, 30, 30, 30, 30, 30, 75, + 75, 31, 32, 73, 27, 33, 30, 30, 1, 12, + 16, 17, 19, 20, 21, 22, 23, 25, 30, 40, + 46, 66, 67, 69, 18, 19, 20, 21, 30, 40, + 52, 67, 69, 39, 49, 72, 39, 50, 55, 61, + 72, 30, 40, 69, 39, 50, 60, 61, 72, 30, + 28, 75, 75, 76, 76, 30, 30, 24, 75, 75, + 71, 70, 71, 75, 25, 76, 1, 13, 30, 71, + 70, 25, 75, 30, 30, 14, 74, 30, 74, 74, + 74, 76, 30, 74, 30, 74, 30, 75, 30, 30, + 30, 74, 30, 30, 30 +}; + +#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__) +# define YYSIZE_T __SIZE_TYPE__ +#endif +#if ! defined (YYSIZE_T) && defined (size_t) +# define YYSIZE_T size_t +#endif +#if ! defined (YYSIZE_T) +# if defined (__STDC__) || defined (__cplusplus) +# include /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# endif +#endif +#if ! defined (YYSIZE_T) +# define YYSIZE_T unsigned int +#endif + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK; \ + goto yybackup; \ + } \ + else \ + { \ + yyerror ("syntax error: cannot back up");\ + YYERROR; \ + } \ +while (0) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (N) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (0) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (0) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yysymprint (stderr, \ + Type, Value); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (0) + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if defined (__STDC__) || defined (__cplusplus) +static void +yy_stack_print (short int *bottom, short int *top) +#else +static void +yy_stack_print (bottom, top) + short int *bottom; + short int *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (/* Nothing. */; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (0) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if defined (__STDC__) || defined (__cplusplus) +static void +yy_reduce_print (int yyrule) +#else +static void +yy_reduce_print (yyrule) + int yyrule; +#endif +{ + int yyi; + unsigned int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ", + yyrule - 1, yylno); + /* Print the symbols being reduced, and their result. */ + for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++) + YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]); + YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]); +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (Rule); \ +} while (0) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined (__GLIBC__) && defined (_STRING_H) +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +static YYSIZE_T +# if defined (__STDC__) || defined (__cplusplus) +yystrlen (const char *yystr) +# else +yystrlen (yystr) + const char *yystr; +# endif +{ + register const char *yys = yystr; + + while (*yys++ != '\0') + continue; + + return yys - yystr - 1; +} +# endif +# endif + +# ifndef yystpcpy +# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE) +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +static char * +# if defined (__STDC__) || defined (__cplusplus) +yystpcpy (char *yydest, const char *yysrc) +# else +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +# endif +{ + register char *yyd = yydest; + register const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +#endif /* !YYERROR_VERBOSE */ + + + +#if YYDEBUG +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if defined (__STDC__) || defined (__cplusplus) +static void +yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep) +#else +static void +yysymprint (yyoutput, yytype, yyvaluep) + FILE *yyoutput; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + /* Pacify ``unused variable'' warnings. */ + (void) yyvaluep; + + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# endif + switch (yytype) + { + default: + break; + } + YYFPRINTF (yyoutput, ")"); +} + +#endif /* ! YYDEBUG */ +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +#if defined (__STDC__) || defined (__cplusplus) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) +#else +static void +yydestruct (yymsg, yytype, yyvaluep) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; +#endif +{ + /* Pacify ``unused variable'' warnings. */ + (void) yyvaluep; + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + case 48: /* choice_entry */ + + { + fprintf(stderr, "%s:%d: missing end statement for this entry\n", + (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno); + if (current_menu == (yyvaluep->menu)) + menu_end_menu(); +}; + + break; + case 54: /* if_entry */ + + { + fprintf(stderr, "%s:%d: missing end statement for this entry\n", + (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno); + if (current_menu == (yyvaluep->menu)) + menu_end_menu(); +}; + + break; + case 59: /* menu_entry */ + + { + fprintf(stderr, "%s:%d: missing end statement for this entry\n", + (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno); + if (current_menu == (yyvaluep->menu)) + menu_end_menu(); +}; + + break; + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +# if defined (__STDC__) || defined (__cplusplus) +int yyparse (void *YYPARSE_PARAM); +# else +int yyparse (); +# endif +#else /* ! YYPARSE_PARAM */ +#if defined (__STDC__) || defined (__cplusplus) +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +# if defined (__STDC__) || defined (__cplusplus) +int yyparse (void *YYPARSE_PARAM) +# else +int yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +# endif +#else /* ! YYPARSE_PARAM */ +#if defined (__STDC__) || defined (__cplusplus) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + register int yystate; + register int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + short int yyssa[YYINITDEPTH]; + short int *yyss = yyssa; + register short int *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + register YYSTYPE *yyvsp; + + + +#define YYPOPSTACK (yyvsp--, yyssp--) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + + + /* When reducing, the number of symbols on the RHS of the reduced + rule. */ + int yylen; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + + + yyvsp[0] = yylval; + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. so pushing a state here evens the stacks. + */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + short int *yyss1 = yyss; + + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow ("parser stack overflow", + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + + &yystacksize); + + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyoverflowlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyoverflowlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + short int *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyoverflowlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + +/* Do appropriate processing given the current state. */ +/* Read a look-ahead token if we need one and don't already have one. */ +/* yyresume: */ + + /* First try to decide what to do without reference to look-ahead token. */ + + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the token being shifted unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + *++yyvsp = yylval; + + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + yystate = yyn; + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 8: + + { zconf_error("unexpected end statement"); ;} + break; + + case 9: + + { zconf_error("unknown statement \"%s\"", (yyvsp[-2].string)); ;} + break; + + case 10: + + { + zconf_error("unexpected option \"%s\"", kconf_id_strings + (yyvsp[-2].id)->name); +;} + break; + + case 11: + + { zconf_error("invalid statement"); ;} + break; + + case 25: + + { zconf_error("unknown option \"%s\"", (yyvsp[-2].string)); ;} + break; + + case 26: + + { zconf_error("invalid option"); ;} + break; + + case 27: + + { + struct symbol *sym = sym_lookup((yyvsp[-1].string), 0); + sym->flags |= SYMBOL_OPTIONAL; + menu_add_entry(sym); + printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), (yyvsp[-1].string)); +;} + break; + + case 28: + + { + menu_end_entry(); + printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 29: + + { + struct symbol *sym = sym_lookup((yyvsp[-1].string), 0); + sym->flags |= SYMBOL_OPTIONAL; + menu_add_entry(sym); + printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), (yyvsp[-1].string)); +;} + break; + + case 30: + + { + if (current_entry->prompt) + current_entry->prompt->type = P_MENU; + else + zconfprint("warning: menuconfig statement without prompt"); + menu_end_entry(); + printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 37: + + { + menu_set_type((yyvsp[-2].id)->stype); + printd(DEBUG_PARSE, "%s:%d:type(%u)\n", + zconf_curname(), zconf_lineno(), + (yyvsp[-2].id)->stype); +;} + break; + + case 38: + + { + menu_add_prompt(P_PROMPT, (yyvsp[-2].string), (yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 39: + + { + menu_add_expr(P_DEFAULT, (yyvsp[-2].expr), (yyvsp[-1].expr)); + if ((yyvsp[-3].id)->stype != S_UNKNOWN) + menu_set_type((yyvsp[-3].id)->stype); + printd(DEBUG_PARSE, "%s:%d:default(%u)\n", + zconf_curname(), zconf_lineno(), + (yyvsp[-3].id)->stype); +;} + break; + + case 40: + + { + menu_add_symbol(P_SELECT, sym_lookup((yyvsp[-2].string), 0), (yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 41: + + { + menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[-3].symbol), (yyvsp[-2].symbol)), (yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 42: + + { + struct symbol *sym = sym_lookup(NULL, 0); + sym->flags |= SYMBOL_CHOICE; + menu_add_entry(sym); + menu_add_expr(P_CHOICE, NULL, NULL); + printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 43: + + { + (yyval.menu) = menu_add_menu(); +;} + break; + + case 44: + + { + if (zconf_endtoken((yyvsp[0].id), T_CHOICE, T_ENDCHOICE)) { + menu_end_menu(); + printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno()); + } +;} + break; + + case 52: + + { + menu_add_prompt(P_PROMPT, (yyvsp[-2].string), (yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 53: + + { + if ((yyvsp[-2].id)->stype == S_BOOLEAN || (yyvsp[-2].id)->stype == S_TRISTATE) { + menu_set_type((yyvsp[-2].id)->stype); + printd(DEBUG_PARSE, "%s:%d:type(%u)\n", + zconf_curname(), zconf_lineno(), + (yyvsp[-2].id)->stype); + } else + YYERROR; +;} + break; + + case 54: + + { + current_entry->sym->flags |= SYMBOL_OPTIONAL; + printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 55: + + { + if ((yyvsp[-3].id)->stype == S_UNKNOWN) { + menu_add_symbol(P_DEFAULT, sym_lookup((yyvsp[-2].string), 0), (yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:default\n", + zconf_curname(), zconf_lineno()); + } else + YYERROR; +;} + break; + + case 58: + + { + printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); + menu_add_entry(NULL); + menu_add_dep((yyvsp[-1].expr)); + (yyval.menu) = menu_add_menu(); +;} + break; + + case 59: + + { + if (zconf_endtoken((yyvsp[0].id), T_IF, T_ENDIF)) { + menu_end_menu(); + printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno()); + } +;} + break; + + case 65: + + { + menu_add_entry(NULL); + menu_add_prompt(P_MENU, (yyvsp[-1].string), NULL); + printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 66: + + { + (yyval.menu) = menu_add_menu(); +;} + break; + + case 67: + + { + if (zconf_endtoken((yyvsp[0].id), T_MENU, T_ENDMENU)) { + menu_end_menu(); + printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno()); + } +;} + break; + + case 73: + + { + printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[-1].string)); + zconf_nextfile((yyvsp[-1].string)); +;} + break; + + case 74: + + { + menu_add_entry(NULL); + menu_add_prompt(P_COMMENT, (yyvsp[-1].string), NULL); + printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 75: + + { + menu_end_entry(); +;} + break; + + case 76: + + { + printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno()); + zconf_starthelp(); +;} + break; + + case 77: + + { + current_entry->sym->help = (yyvsp[0].string); +;} + break; + + case 82: + + { + menu_add_dep((yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 83: + + { + menu_add_dep((yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:depends\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 84: + + { + menu_add_dep((yyvsp[-1].expr)); + printd(DEBUG_PARSE, "%s:%d:requires\n", zconf_curname(), zconf_lineno()); +;} + break; + + case 86: + + { + menu_add_prompt(P_PROMPT, (yyvsp[-1].string), (yyvsp[0].expr)); +;} + break; + + case 89: + + { (yyval.id) = (yyvsp[-1].id); ;} + break; + + case 90: + + { (yyval.id) = (yyvsp[-1].id); ;} + break; + + case 91: + + { (yyval.id) = (yyvsp[-1].id); ;} + break; + + case 94: + + { (yyval.expr) = NULL; ;} + break; + + case 95: + + { (yyval.expr) = (yyvsp[0].expr); ;} + break; + + case 96: + + { (yyval.expr) = expr_alloc_symbol((yyvsp[0].symbol)); ;} + break; + + case 97: + + { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[-2].symbol), (yyvsp[0].symbol)); ;} + break; + + case 98: + + { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[-2].symbol), (yyvsp[0].symbol)); ;} + break; + + case 99: + + { (yyval.expr) = (yyvsp[-1].expr); ;} + break; + + case 100: + + { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[0].expr)); ;} + break; + + case 101: + + { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[-2].expr), (yyvsp[0].expr)); ;} + break; + + case 102: + + { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[-2].expr), (yyvsp[0].expr)); ;} + break; + + case 103: + + { (yyval.symbol) = sym_lookup((yyvsp[0].string), 0); free((yyvsp[0].string)); ;} + break; + + case 104: + + { (yyval.symbol) = sym_lookup((yyvsp[0].string), 1); free((yyvsp[0].string)); ;} + break; + + + } + +/* Line 1037 of yacc.c. */ + + + yyvsp -= yylen; + yyssp -= yylen; + + + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if YYERROR_VERBOSE + yyn = yypact[yystate]; + + if (YYPACT_NINF < yyn && yyn < YYLAST) + { + YYSIZE_T yysize = 0; + int yytype = YYTRANSLATE (yychar); + const char* yyprefix; + char *yymsg; + int yyx; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 0; + + yyprefix = ", expecting "; + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]); + yycount += 1; + if (yycount == 5) + { + yysize = 0; + break; + } + } + yysize += (sizeof ("syntax error, unexpected ") + + yystrlen (yytname[yytype])); + yymsg = (char *) YYSTACK_ALLOC (yysize); + if (yymsg != 0) + { + char *yyp = yystpcpy (yymsg, "syntax error, unexpected "); + yyp = yystpcpy (yyp, yytname[yytype]); + + if (yycount < 5) + { + yyprefix = ", expecting "; + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + yyp = yystpcpy (yyp, yyprefix); + yyp = yystpcpy (yyp, yytname[yyx]); + yyprefix = " or "; + } + } + yyerror (yymsg); + YYSTACK_FREE (yymsg); + } + else + yyerror ("syntax error; also virtual memory exhausted"); + } + else +#endif /* YYERROR_VERBOSE */ + yyerror ("syntax error"); + } + + + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* If at end of input, pop the error token, + then the rest of the stack, then return failure. */ + if (yychar == YYEOF) + for (;;) + { + + YYPOPSTACK; + if (yyssp == yyss) + YYABORT; + yydestruct ("Error: popping", + yystos[*yyssp], yyvsp); + } + } + else + { + yydestruct ("Error: discarding", yytoken, &yylval); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + +#ifdef __GNUC__ + /* Pacify GCC when the user code never invokes YYERROR and the label + yyerrorlab therefore never appears in user code. */ + if (0) + goto yyerrorlab; +#endif + +yyvsp -= yylen; + yyssp -= yylen; + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + + yydestruct ("Error: popping", yystos[yystate], yyvsp); + YYPOPSTACK; + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yydestruct ("Error: discarding lookahead", + yytoken, &yylval); + yychar = YYEMPTY; + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*----------------------------------------------. +| yyoverflowlab -- parser overflow comes here. | +`----------------------------------------------*/ +yyoverflowlab: + yyerror ("parser stack overflow"); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif + return yyresult; +} + + + + + +void conf_parse(const char *name) +{ + struct symbol *sym; + int i; + + zconf_initscan(name); + + sym_init(); + menu_init(); + modules_sym = sym_lookup("MODULES", 0); + rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL); + +#if YYDEBUG + if (getenv("ZCONF_DEBUG")) + zconfdebug = 1; +#endif + zconfparse(); + if (zconfnerrs) + exit(1); + menu_finalize(&rootmenu); + for_all_symbols(i, sym) { + sym_check_deps(sym); + } + + sym_change_count = 1; +} + +const char *zconf_tokenname(int token) +{ + switch (token) { + case T_MENU: return "menu"; + case T_ENDMENU: return "endmenu"; + case T_CHOICE: return "choice"; + case T_ENDCHOICE: return "endchoice"; + case T_IF: return "if"; + case T_ENDIF: return "endif"; + case T_DEPENDS: return "depends"; + } + return ""; +} + +static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken) +{ + if (id->token != endtoken) { + zconf_error("unexpected '%s' within %s block", + kconf_id_strings + id->name, zconf_tokenname(starttoken)); + zconfnerrs++; + return false; + } + if (current_menu->file != current_file) { + zconf_error("'%s' in different file than '%s'", + kconf_id_strings + id->name, zconf_tokenname(starttoken)); + fprintf(stderr, "%s:%d: location of the '%s'\n", + current_menu->file->name, current_menu->lineno, + zconf_tokenname(starttoken)); + zconfnerrs++; + return false; + } + return true; +} + +static void zconfprint(const char *err, ...) +{ + va_list ap; + + fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno()); + va_start(ap, err); + vfprintf(stderr, err, ap); + va_end(ap); + fprintf(stderr, "\n"); +} + +static void zconf_error(const char *err, ...) +{ + va_list ap; + + zconfnerrs++; + fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno()); + va_start(ap, err); + vfprintf(stderr, err, ap); + va_end(ap); + fprintf(stderr, "\n"); +} + +static void zconferror(const char *err) +{ +#if YYDEBUG + fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err); +#endif +} + +void print_quoted_string(FILE *out, const char *str) +{ + const char *p; + int len; + + putc('"', out); + while ((p = strchr(str, '"'))) { + len = p - str; + if (len) + fprintf(out, "%.*s", len, str); + fputs("\\\"", out); + str = p + 1; + } + fputs(str, out); + putc('"', out); +} + +void print_symbol(FILE *out, struct menu *menu) +{ + struct symbol *sym = menu->sym; + struct property *prop; + + if (sym_is_choice(sym)) + fprintf(out, "choice\n"); + else + fprintf(out, "config %s\n", sym->name); + switch (sym->type) { + case S_BOOLEAN: + fputs(" boolean\n", out); + break; + case S_TRISTATE: + fputs(" tristate\n", out); + break; + case S_STRING: + fputs(" string\n", out); + break; + case S_INT: + fputs(" integer\n", out); + break; + case S_HEX: + fputs(" hex\n", out); + break; + default: + fputs(" ???\n", out); + break; + } + for (prop = sym->prop; prop; prop = prop->next) { + if (prop->menu != menu) + continue; + switch (prop->type) { + case P_PROMPT: + fputs(" prompt ", out); + print_quoted_string(out, prop->text); + if (!expr_is_yes(prop->visible.expr)) { + fputs(" if ", out); + expr_fprint(prop->visible.expr, out); + } + fputc('\n', out); + break; + case P_DEFAULT: + fputs( " default ", out); + expr_fprint(prop->expr, out); + if (!expr_is_yes(prop->visible.expr)) { + fputs(" if ", out); + expr_fprint(prop->visible.expr, out); + } + fputc('\n', out); + break; + case P_CHOICE: + fputs(" #choice value\n", out); + break; + default: + fprintf(out, " unknown prop %d!\n", prop->type); + break; + } + } + if (sym->help) { + int len = strlen(sym->help); + while (sym->help[--len] == '\n') + sym->help[len] = 0; + fprintf(out, " help\n%s\n", sym->help); + } + fputc('\n', out); +} + +void zconfdump(FILE *out) +{ + struct property *prop; + struct symbol *sym; + struct menu *menu; + + menu = rootmenu.list; + while (menu) { + if ((sym = menu->sym)) + print_symbol(out, menu); + else if ((prop = menu->prompt)) { + switch (prop->type) { + case P_COMMENT: + fputs("\ncomment ", out); + print_quoted_string(out, prop->text); + fputs("\n", out); + break; + case P_MENU: + fputs("\nmenu ", out); + print_quoted_string(out, prop->text); + fputs("\n", out); + break; + default: + ; + } + if (!expr_is_yes(prop->visible.expr)) { + fputs(" depends ", out); + expr_fprint(prop->visible.expr, out); + fputc('\n', out); + } + fputs("\n", out); + } + + if (menu->list) + menu = menu->list; + else if (menu->next) + menu = menu->next; + else while ((menu = menu->parent)) { + if (menu->prompt && menu->prompt->type == P_MENU) + fputs("\nendmenu\n", out); + if (menu->next) { + menu = menu->next; + break; + } + } + } +} + +#include "lex.zconf.c" +#include "util.c" +#include "confdata.c" +#include "expr.c" +#include "symbol.c" +#include "menu.c" + +